The White House

Office of the Press Secretary

Remarks by the President at Presentation of The Medal of Honor to Corporal William Kyle Carpenter

East Room

2:33 P.M. EDT

THE PRESIDENT:  Thank you, everybody.  Please be seated.  On behalf of Michelle and myself, welcome to the White House. 

The man you see before you today, Corporal William Kyle Carpenter, should not be alive today.  Hand grenades are one of the most awful weapons of war.  They only weigh about a pound, but they’re packed with TNT.  If one lands nearby, you have mere seconds to seek cover.  When it detonates, its fragments shoot out in every direction.  And even at a distance, that spray of shrapnel can inflict devastating injuries on the human body.  Up close, it’s almost certain death.   

But we are here because this man, this United States Marine, faced down that terrible explosive power, that unforgiving force, with his own body -- willingly and deliberately -- to protect a fellow Marine.  When that grenade exploded, Kyle Carpenter’s body took the brunt of the blast.  His injuries were called “catastrophic.”  It seemed as if he was going to die.  While being treated, he went into cardiac arrest, and three times, he flatlined.  Three times, doctors brought him back.

Along with his parents, who call Kyle’s survival “our miracle,” we thank God they did.  Because with that singular act of courage, Kyle, you not only saved your brother in arms, you displayed a heroism in the blink of an eye that will inspire for generations valor worthy of our nation’s highest military decoration, the Medal of Honor.

Now, Kyle and I have actually met before.  During his long recovery at Walter Reed, he and some of our other wounded warriors came to the White House to celebrate the World Series champion, the St. Louis Cardinals.  Some of you might be aware, I am a White Sox fan.  (Laughter.)  Kyle likes the Braves.  So it was a tough day for both of us.  (Laughter.)   

But after the ceremony, Michelle and I had the chance to meet Kyle.  And at the time, he was still undergoing surgeries.  But he was up and he was walking, and he was working his way toward being independent again, towards the man you see here today.  And, Kyle, the main message we want to send is, welcome back.  We are so proud to have you here. 

We just spent some time not just with Kyle, but also with his wonderful family.  And anybody who has had a chance to get to know this young man knows you’re not going to get a better example of what you want in an American or a Marine.  Despite all the attention, he’s still the same humble guy from Gilbert, South Carolina, population of about 600 -- I guess today it’s only population 590-something.  (Laughter.) 

These days he’s also at the University of South Carolina, “just a normal college student,” he says, cheering for the Gamecocks.  You’ll notice that Kyle doesn’t hide his scars; he’s proud of them, and the service that they represent.  And, now, he tells me this, and so I’m just quoting him -- he says, “the girls definitely like them.”  (Laughter.)  So he’s kind of -- he’s working an angle on this thing.  (Laughter.)  I wasn’t sure whether I was supposed to say that in front of mom.  (Laughter.)  But there’s a quote there.

In addition to our many distinguished guests, I want to welcome those who made this man the Marine that he is -- Kyle’s father, Jim; Kyle’s lovely mom, Robin; and his brothers, Price, and Peyton, one of whom is going to be joining Kyle at South Carolina, another Gamecock, and then we’ve got one who’s going to be at The Citadel.  We also have Kyle’s Marine brothers who served with him in Afghanistan and through his recovery.  And I also want to welcome the members of the Medal of Honor Society, whose ranks Kyle joins today.

Kyle and his fellow Marines served during the surge of forces that I ordered to Afghanistan early in my presidency.  Their mission was to drive the Taliban out of their strongholds, protect the Afghan people and give them a chance to reclaim their communities.
 
Kyle and his platoon were in Helmand province in Marja, pushing their way across open fields and muddy canals, bearing their heavy packs even as it could heat up to 115 degrees.  In one small village, they turned a dusty compound into their base.  The insurgents nearby gave their answer with sniper fire, and automatic weapon fire, and rocket-propelled grenades.

That morning, Kyle said, “our alarm clock was AK-47 fire.”  Some of the men were by their bunks, gearing up for another day.  Some were heating up their MREs.  Some were in makeshift ops centers -- a simple mud building -- planning the day’s patrols.  And up on the roof, behind a circle of sandbags, two Marines manned their posts -- Kyle, and Lance Corporal Nicholas Eufrazio. 
The compound started to take fire.  Seeking cover, Kyle and Nick laid down low on their backs behind those sandbags.  And then the grenade landed with a thud, its pin already pulled.  It was about to explode.

And Kyle has no memory of what happened next.  What we do know is that there on that rooftop he wasn’t just with a fellow Marine, he was with his best friend.  Kyle and Nick had met in training.  In Afghanistan they patrolled together, day and night, a friendship forged in fire.  Kyle says about Nick, “He was my point man, and I loved him like a brother.” 

When the grenade landed, other Marines in the compound looked up and saw it happen.  Kyle tried to stand.  He lunged forward toward that grenade, and then he disappeared into the blast.   Keep in mind, at the time, Kyle was just 21 years old.  But in that instant, he fulfilled those words of Scripture:  “Greater love hath no man than this; that a man lay down his life for his friends.” 

They found Kyle lying face down, directly over the blast area.  His helmet was riddled with holes.  His gear was melted.  Part of his Kevlar vest was blown away.  One of the doctors who treated him later said Kyle was “literally wounded from the top of his head to his feet.” 

And for a moment, Kyle was still conscious.  His eyes were open but he couldn’t see.  Kyle remember “everything went white.”  And yet, even then, his thoughts were not of himself.  One of the Marines who was there remembers how Kyle kept asking one question, and that was whether Nick was okay.  And then, as Kyle’s strength drained away, he sensed the end was coming.  So according to Kyle’s memories, “My last thought [was to] make peace with God.  I asked for forgiveness.  I was trying to make the best and most of my last few seconds here on Earth.”
  
The Medal of Honor is presented for gallantry on the battlefield.  But today, we also recognize Kyle Carpenter for his valor since in the hard fight for recovery.  Eventually, Kyle woke up after five weeks in a coma.  I want you to consider what Kyle has endured just to stand here today -- more than two and a half years in the hospital.  Grueling rehabilitation.  Brain surgery to remove shrapnel from his head.  Nearly 40 surgeries to repair a collapsed lung, fractured fingers, a shattered right arm broken in more than 30 places, multiple skin grafts.  He has a new prosthetic eye, a new jaw, new teeth -- and one hell of a smile.  (Laughter.)  

And Kyle is the first to give credit elsewhere.  His doctors at Bethesda, he says, “put me back together well.”  Today is also a reminder that in past wars, somebody with injuries as severe as Kyle’s probably wouldn’t have survived.  So many of our wounded warriors from today’s wars are alive not just because of remarkable advances in technology, but primarily because of the extraordinary dedication and skill of our military and our VA medical professionals. 

So we need to keep doing everything we can in our power to give our wounded warriors and those who treat them the support that they need.  And I think this is a wonderful opportunity to ask doctors Debra Malone and Lauren Greer, and the rest of Kyle’s medical team who are here to please stand.  I see their amazing work every time I visit Bethesda, every time I visited Walter Reed.  It’s pretty rare where you’ve got a job where you just know you’re doing God’s work every single day.  And they do an incredible job, so thank you.  (Applause.)  Thank you for the miracles you work for our wounded troops and veterans. 

Now, Kyle says he’ll wear this medal for all who serve and for those who didn’t make it back, and for those who struggle still.  So today, we also honor two members of his team who made the ultimate sacrifice in that deployment:  Kyle’s friends Lance Corporal Timothy M. Jackson of Corbin, Kentucky, and Lance Corporal Dakota R. Huse of Greenwood, Louisiana. 

And our thoughts are also with the Marine who Kyle saved that day, his brother, Nick.  I had the opportunity to meet Nick as well nearly two years after the blast on one of my visits to Walter Reed.  Nick also suffered grievous wounds.  As a result of traumatic brain injury, he couldn’t speak for more than a year.  He also endured multiple surgeries.  Today, his recovery continues.  He lives at home with his family in Plymouth, Massachusetts, where he is watching this ceremony.  So, Nick, on behalf of all of us, I want you to know we honor your sacrifice as well.  Your perseverance is an inspiration.  And just as Kyle was there for you, our nation will be there for you and your family as you grow stronger in the years ahead.

If any of our wounded warriors seek an example -- let me amend that -- if any American seeks a model of the strength and resilience that define us as a people, including this newest 9/11 generation, I want you to consider Kyle.  After everything he’s been through, he skis, he snowboards, he’s jumped from a plane -- with a parachute, thankfully.  (Laughter.)  He trudged through a 6-mile Mud Run, completed the Marine Corps Marathon, says he wants to do a triathlon.  He’s a motivational speaker, an advocate for his fellow wounded warriors.  He’s thinking about majoring in psychology so he can use his own experiences to help others.  He got stellar grades.  And, by the way, he’s only 24 years old, and says, “I am just getting started.” 

In other words, Kyle is a shining example of what our nation needs to encourage -- these veterans who come home and then use their incredible skills and talents to keep our country strong.  And we can all learn from Kyle’s example. 

As we prepare for the reading of the citation, I’d like to close with his own words -- a message, I think, for every American. “It took a life-changing event to get me to truly appreciate the precious and amazing life I have been blessed with.  Please take it from me, enjoy every day to the fullest, don't take life too seriously, always try to make it count, appreciate the small and simple things, be kind and help others, let the ones you love always know you love them, and when things get hard trust there is a bigger plan and that you will be stronger for it.”  Pretty good message.

Corporal William Kyle Carpenter should not be alive today, but the fact that he is gives us reason to trust that there is indeed a bigger plan.  So God bless you, Kyle.  God bless all who serve and protect the precious and amazing life that we are blessed with.  May God continue to bless and keep strong the United States of America.  Semper Fi.  (Applause.)

MILITARY AIDE:  The President of the United States, in the name of the Congress, takes pleasure in presenting the Medal of Honor to Lance Corporal William Kyle Carpenter, United States Marine Corps, for conspicuous gallantry and intrepidity at the risk of his life above and beyond the call of duty while serving as an automatic rifleman with Company F, 2nd Battalion, 9th Marines, Regimental Combat Team One, 1st Marine Division (Forward), 1st Marine Expeditionary Force (Forward), in Helmand Province, Afghanistan in support of Operation Enduring Freedom on 21 November, 2010.

Lance Corporal Carpenter was a member of a platoon-sized coalition force comprised of two reinforced Marine rifle squads, partnered with an Afghan National Army squad.  The platoon had established Patrol Base Dakota two days earlier in a small village in the Marja District in order to disrupt enemy activity and provide security for the local Afghan population.

Lance Corporal Carpenter and a fellow Marine were manning a rooftop security position on the perimeter of Patrol Base Dakota when the enemy initiated a daylight attack with hand grenades, one of which landed inside their sandbagged position.  Without hesitation and with complete disregard for his own safety, Lance Corporal Carpenter moved towards the grenade in an attempt to shield his fellow Marine from the deadly blast.  When the grenade detonated, his body absorbed the brunt of the blast, severely wounding him but saving the life of his fellow Marine.

By his undaunted courage, bold fighting spirit, and unwavering devotion to duty in the face of almost certain death, Lance Corporal Carpenter reflected great credit upon himself and upheld the highest traditions of the Marine Corps and the United States Naval Service. 

(The Medal of Honor is presented.) 

(Prayer is offered.)

THE PRESIDENT:  Well, that brings us to the conclusion of this ceremony, but not the reception and party.  And so I want to thank everybody again for being here, especially Kyle’s wonderful family and his parents.  And I understand that the food here at the White House is pretty good -- (laughter) -- so I already told Kyle’s brothers that they should be chowing down.  But that goes for everybody else as well -- and I think the drinks are free.  I don’t know what -- although it’s still early in the afternoon.

Thank you very much, everybody.
   
END 
2:51 P.M. EDT

The White House

Office of the Press Secretary

Notice to Congress -- Continuation of the National Emergency on Russian Fissile Material

NOTICE
 
- - - - - - -
 
CONTINUATION OF THE NATIONAL EMERGENCY WITH RESPECT TO
THE DISPOSITION OF RUSSIAN HIGHLY ENRICHED URANIUM

On June 25, 2012, by Executive Order 13617, I declared a national emergency pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701-1706) to deal with the unusual and extraordinary threat to the national security and foreign policy of the United States constituted by the risk of nuclear proliferation created by the accumulation of a large volume of weapons-usable fissile material in the territory of the Russian Federation.
 
Full implementation of the Agreement Between the Government of the United States of America and the Government of the Russian Federation Concerning the Disposition of Highly Enriched Uranium Extracted from Nuclear Weapons, dated February 18, 1993, and related contracts and agreements (collectively, the "HEU Agreements") is essential to the attainment of U.S. national security and foreign policy goals.  Assets of the Government of the Russian Federation directly related to the implementation of the HEU Agreements may be subject to attachment, judgment, decree, lien, execution, garnishment, or other judicial process, thereby jeopardizing the full implementation of the HEU Agreements to the detriment of U.S. national security and foreign policy.  In order to ensure the preservation and proper and complete transfer to the Government of the Russian Federation of all payments due to it under the HEU Agreements, in Executive Order 13617 I ordered the blocking of all property and interests in property of the Government of the Russian Federation directly related to the implementation of the HEU Agreements and declared any attachment, judgment, decree, lien, execution, garnishment, or other judicial process with respect to such blocked property to be null and void, unless licensed or authorized pursuant to Executive Order 13617 or
Executive Order 13159 of June 21, 2000.
 
The risk of nuclear proliferation created by the accumulation of a large volume of weapons-usable fissile material in the territory of the Russian Federation continues to pose an unusual and extraordinary threat to the national security and foreign policy of the United States.  For this reason, the national emergency declared in Executive Order 13617 of June 25, 2012, and the measures adopted on that date to deal with that emergency, must continue in effect beyond June 25, 2014.  Therefore, in accordance with section 202(d) of the National Emergencies Act (50 U.S.C. 1622(d)), I am continuing for 1 year the national emergency declared with respect to the disposition of Russian highly enriched uranium declared in Executive Order 13617.
  
This notice shall be published in the Federal Register and transmitted to the Congress.

BARACK OBAMA
 

The White House

Office of the Press Secretary

Message to Congress -- Continuation of the National Emergency on Russian Fissile Material

TO THE CONGRESS OF THE UNITED STATES:

Section 202(d) of the National Emergencies Act (50 U.S.C. 1622(d)) provides for the automatic termination of a national emergency unless, within 90 days prior to the anniversary date of its declaration, the President publishes in the Federal Register and transmits to the Congress a notice stating that the emergency is to continue in effect beyond the anniversary date.  In accordance with this provision, I have sent to the Federal Register for publication the enclosed notice stating that the emergency declared in Executive Order 13617 of June 25, 2012, with respect to the disposition of Russian highly enriched uranium is to continue in effect beyond June 25, 2014.

The risk of nuclear proliferation created by the accumulation of a large volume of weapons-usable fissile material in the territory of the Russian Federation continues to pose an unusual and extraordinary threat to the national security and foreign policy of the United States.  Therefore, I have determined that it is necessary to continue the national emergency declared in Executive Order 13617 with respect to the disposition of Russian highly enriched uranium.

BARACK OBAMA

The White House

Office of the Press Secretary

Statement by NSC Spokesperson Caitlin Hayden on the Response to Uganda’s Enactment of the Anti-Homosexuality Act

As President Obama has stated, the Government of Uganda’s enactment of the Anti-Homosexuality Act (AHA) runs counter to universal human rights and complicates our bilateral relationship. We announced in April a series of initial responses, and we have since considered how further to reinforce our support for human rights of all Ugandans, regardless of sexual orientation or gender identity.

Today, we are announcing several additional steps. Specifically, the Department of State is taking measures to prevent entry into the United States by certain Ugandan officials involved in serious human rights abuses, including against LGBT individuals. In addition, the United States will take steps, consistent with current authorities, to prevent entry into the United States by Ugandans who are found responsible for significant public corruption.  We are also discontinuing or redirecting funds for certain additional programs involving the Ugandan Police Force, Ministry of Health, and National Public Health Institute, and cancelling plans to hold a U.S. military-sponsored aviation exercise in Uganda.

None of these steps diminishes our commitment to providing development and humanitarian support for the Ugandan people, or our partnership with the Ugandan government to counter the murderous Lord’s Resistance Army and improve security in Africa. We will seek to advance these interests even as we continue—in Uganda and around the world—to oppose discriminatory practices and champion human rights for all. 

The White House

Office of the Press Secretary

Remarks by the President at Export Council Meeting

Eisenhower Executive Office Building

10:30 A.M. EDT

THE PRESIDENT:  I just wanted to say thank you to all of you who are here.  Some of you have been serving on our Export Council for quite some time.  Some of you are here as new additions, but all of you have been extraordinarily successful in your various fields.  And it gives us an enormous opportunity to hear from you in very concrete terms about how we can advance not just America’s export agenda, but how we can build the kind of economic future that we want for our kids and our grandkids. 

For the last 51 months, we have created jobs here in the United States -- 9.4 million jobs in all.  But we’re going to have to create more.  And one of the best ways to do it is to boost American manufacturing and American exports.  That’s why since I came into office we have been promoting American products and businesses when I travel overseas.  It’s why we created the President’s Export Council in 2010.  There are some of the most iconic companies in the world -- Boeing being an example, Xerox being another one. 

And with your help, exports have driven one-third of the economic growth in our recovery and now support over 11 million U.S. jobs.  Last year, we exported $2.3 trillion in goods and services, which was an all-time high.  And business executives around the globe say that the United States is the best place to locate, the best place to invest, and the best place to hire.  And that’s the first time that they’ve said that, that we are number one when it comes to their desirable location to invest.  This is the first time they’ve said that in over a decade. 

So the “Made in America” brand is stronger than ever.  And as we saw yesterday at the first White House Maker Faire -- I was out there watching these 22-year-olds coming up with incredible things -- it is going to be a remarkable future that we have to look ahead to.  Because in many ways, manufacturing is becoming easier, some of the barriers to entry are lowering.  It gives inventors and entrepreneurs the opportunity to create new products and services in ways that we can’t even imagine.  And we want to make sure that all those trends accelerate here in the United States.

So this is a moment of opportunity.  We’ve got a chance to extend our competitive advantage in the world.  That’s what this meeting is about.  One thing I want to focus on today is opening up even more new markets to “Made in America” products.  We’re working very hard to finalize trade agreements with our partners in Europe and in Asia that will make us the center of a free trade hub covering two-thirds of the world economy.  And Mr. Michael Froman has been putting in a lot of miles trying to make sure that that happens.  And I know he’s consulted with some of you -- not just big companies, but a lot of small- and medium-sized businesses who have enormous opportunities if we’re able to open up these markets, and oftentimes are the ones that have the hardest time navigating through some of the barriers that are out there.

I especially want to increase trade and investment in the region.  And this is going to be one of the issues we discuss in August.  There has been some explosive growth in certain parts of the world where we’re just not doing enough, Africa as being a prime example.  You’ve got six of the 10 fastest-growing economies in Africa, a young population that is growing rapidly.  Some of these economies are doing very, very well, but we’re not penetrating those markets as well as we should. 

And I think we’ve got a great opportunity in August with an African Leaders Summit that’s going to be taking place for us to talk about trade and commerce, because that’s really what that continent is interested in.  They’re not interested in aid as much as they are trade, development, and partnering with the private sector. 

And as your businesses know well, when we export products overseas, we’re creating jobs and opportunities here at home.  That’s the focus here today and every day of my presidency -- how do we create thriving businesses that are also able to create great jobs that allow people not just to stay in the middle class, but to work their way into the middle class if they work hard and take responsibility.  And all of you have done that. 

This council is doing great work.  And with that, I’m going to turn it back over to Jay to hear about some of the ideas that you’ve come up with and how we can help advance this agenda.

END          
10:35 A.M. EDT

The White House

Office of the Press Secretary

Statement by the President on the Investiture of His Majesty King Felipe VI of Spain

On behalf of the American people, I congratulate His Majesty King Felipe VI on the occasion of his investiture as King of Spain.  We are grateful to King Juan Carlos I for his friendship and leadership in guiding Spain’s democracy and deepening the transatlantic relationship. 

Spain is a valued ally of the United States, and we share strong ties, steeped in history.  I look forward to working closely with King Felipe VI and continuing to strengthen this bond in the years to come.  As Spain celebrates this transition and looks ahead to the future, the American people celebrate along with the people of Spain.

The White House

Office of the Press Secretary

Press Briefing by Press Secretary Jay Carney, 6/18/2014

James S. Brady Press Briefing Room

1:20 P.M. EDT

MR. CARNEY:  Now, that is some good rock and roll.  (Laughter.)  As if you didn’t know.  Well, thank you for that.  That was pretty awesome, a Guided by Voices introduction.  I appreciate that.

Let me say -- I got a few things at the top of this, my last briefing from the podium.  First is a bit of official business.  Today, the President hosted the first-ever White House Maker Faire to celebrate a nation of makers and help empower America’s students and entrepreneurs to invent the future.  America has always been a nation of tinkerers, inventors and entrepreneurs.  The President believes that the rise of the maker movement represents a huge opportunity for the United States.

Nationwide, new tools for democratized production are boosting innovation and entrepreneurship in manufacturing in the same way that the Internet and cloud computing have lowered the barriers to entry for digital startups, creating the foundation for new products and processes that can help to revitalize American manufacturing.

The White House Maker Faire features makers, innovators and entrepreneurs of all ages who are using cutting-edge tools such as 3D printers, laser cutters and easy-to-use design software to bring their ideas to life.  Some of these may very well create industries and jobs of the future.  As part of this Year of Action and this week’s focus on efforts that will expand opportunity by spurring manufacturing, innovation and entrepreneurship, the President also announced new steps the administration and its partners are taking to increase the ability of more Americans, young and old, to have access to these tools and techniques. 

That’s my official topper.

Then, I wanted to mention that some of you may remember last week I came out with an Oakland A’s hat and it wasn’t really an Oakland A’s hat.  It was the A’s hat that my son’s team wore when they won the championship in their Little League, their baseball league.  Well, on Saturday, my daughter’s team -- which was visited by the President, and after that visit went on a substantial run of wins -- won its championship.  And while I don’t have a Royals hat, although I’m trusting that Josh Earnest will bring one as a KC Royals fan, I wanted to say thank you to the Northwest Little League Triple A champions, the Kansas City Royals.  I know the President was glad to hear yesterday that they had won their championship.  And for any of you with more than one child, you know you love them all equally.  (Laughter.)

So finally, I just want to say thank you to all of you here.  This has been an extraordinary experience.  And I have loved every minute of every day, even the many minutes of many days I’ve spent in this room, as I think most of you now understand and believe.  It’s always a pleasure no matter how hard it can get in here, how hot it can sometimes be and contentious it sometimes is. 

The President, to many of us, said that of the jobs that we have here in the White House, that most of us will never be in a position to do more good for more people as we are in right now, and we should take advantage of it.  And that is something that I think we all here take to heart.  And I don’t ever expect to be in a position again to be a part of something that has at least the potential to do more good for more people, and that has been a very special thing, indeed.

I loved my years as a reporter, but as you better than anyone else understand, reporting sometimes can be an autonomous exercise.  It’s your story, it’s your byline.  What was so different about this experience for me is that it was all about a team effort and all about a goal that had nothing to do with any individual, not even the President.  And that’s been extraordinarily gratifying to be a part of.

What I won’t do -- although if provoked, I will later -- is go through a list of all the things, the very many good things that have been accomplished by this President, this administration in my time here that I believe represent doing a lot of good for a lot of people in this country and around the world.  But I think that record is a good one and one I’m proud of. 

I guess with that, I’ll go to questions.  At the end, I’d like to opportunity to say thanks to my colleagues. 

You know what, I’m going to do that now, because I have a feeling it could get lost a little bit.  First of all, to the President and the Vice President, the First Lady and Dr. Biden, my deep thanks for this opportunity.  The Vice President took a chance on me.  Two years later, the President took a chance on me.  And I hope I didn’t give either of them any regrets.  The Chiefs of Staff that I served -- Denis McDonough, Jack Lew, Bill Daley, Rahm Emanuel, Valerie Jarrett and Pete Rouse; David Plouffe -- a key advisor, and friend and mentor; Dan Pfieffer, Jen Palmieri, Alyssa Mastromonaco, Nancy-Ann DeParle, Rob Nabors, Kathy Ruemmler, Amy Brundage, Jen Psaki, Katie Beirne Fallon, Anita, Danielle, Tom, Susan -- just the list goes on, Tony Blinken.  These are extraordinary people.  Ron Klain, Ben Rhodes, Jeff Tiller, Marissa Hopkins, Howli Ledbetter.  All superb individuals with whom I’ve had a great privilege to serve and have some good times with.  I thank them all.

Marvin and Pete, I think I probably owe you some money, but thank you as well.  And everyone else here -- I know I've forgotten a lot.  The Uniformed and Presidential Protective Division Secret Service agents are extraordinary people who serve their country and the President and others so well.  The folks who work in this building and who work on Air Force One, I'd like to thank them.

And then finally, I'd like to thank you.  I think some of you may remember Ben Feller, who was sitting in that chair, asked me on my first day as my first question about how I viewed this job.  And I said, first of all, we all are here to serve the President and the country.  We work for him.  But the press secretary is in a unique position within a White House, and not just because I'm a former journalist -- because I think every press secretary understood this and understands it -- we work to promote what the President is doing and the message he’s trying to convey to the American people, but I also work with the press to try to help you do your jobs, to help you cover the White House, cover the administration, and report on what we're doing here.  And that is what I've tried to do.  And you will be the judge of my success, at least in part.

Finally, I want to say thanks to my deputy, Josh, soon-to-be White House Press Secretary.  No one has been more ready to do this.  I want to say thanks to Eric and Shawn.  You guys are in good hands with them. 

Any questions?

Q    Thanks, Jay.  On behalf of my colleagues, congratulations on making it to your last briefing, and I wish you the best of luck in post-White House endeavors.

MR. CARNEY:  Thank you.

Q    If we can get to Iraq.  The President is meeting with lawmakers here this afternoon.  Is he going to be in a position to tell those lawmakers his decisions?  And if he’s not in that position, how much longer can he afford to wait to provide the Iraqis with assistance given what officials here have said is the urgency and the gravity of that situation?

MR. CARNEY:  First of all, the President, as you noted, will meet today at 3:00 p.m. with Senate Majority Leader Reid, Senate Minority Leader McConnell, Speaker Boehner, and Democratic Leader Pelosi at the White House as part of his ongoing consultations with congressional leadership on foreign policy issues, including here obviously the situation in Iraq as part of our ongoing consultations with Congress on this issue.

When it comes to the options that the President is considering, first of all, I want to make clear the President has ruled out only sending U.S. troops back into combat in Iraq.  Ultimately, the solution that is needed is an Iraqi one, and any U.S. action, including any possible military action, would be in support of a strategy to build the capacity of the Iraqis to effectively and sustainably counter the threat posed by extremists. 

We have been clear about the elements that we are reviewing. First, how to most effectively deal with the urgent and imminent threat from ISIL; how to build the capacity of the Iraqi security forces to fight this threat in both the short and long term; and how to encourage Iraq’s leaders to put aside their differences and to facilitate non-sectarian cooperative governance. 

Military action is a component of the options the President is considering.  But to reiterate what we have been saying, this is not primarily a military challenge.  Iraq needs help to break the momentum of extremist groups and bolster the capabilities of Iraq security forces, but there is no military solution that will sustainably solve Iraq’s problems.  And any consideration of military action must be informed by the situation on the ground and the objectives to be obtained, as well as the consequences of its use. 

So the meeting today will be part of a process of consultation with Congress.  The President obviously will inform him of some of -- inform the leaders of his thinking on some of these issues, but we'll also want to hear about their thinking.  We, here in Washington, obviously -- and this includes the leaders who will be visiting -- have spent a lot of time over the past decade thinking about and understanding Iraq and the complexities there.  So the President looks forward to having this meeting.

Q    It sounds like you’re saying he has not made any decisions, and so I'm wondering do those decisions get harder, though -- does that situation on the ground get harder the longer it takes for the U.S. to provide some type of assistance?

MR. CARNEY:  Well, I would say a couple of things.  The right way to go about this is to assess -- is to develop an approach that is inclusive of the three elements I just mentioned.  It cannot just be about what direct action we may or may not take.  And it also has to be one that keeps in mind what our objectives are.  The ultimate objective here is to protect the national security interests of the United States, to prevent portions of Iraq, portions of the region from becoming a safe haven for ISIL -- extremists who may ultimately pose a threat to the United States or to our interests abroad and our allies. 

And that is the lens through which the President approaches these matters and these decisions, and that obviously especially includes any contemplation of direct action. 

Ultimately, Iraq has to take responsibility for its own security.  We in this country spent more than eight years, nine years, and spent a lot in both blood and treasure in an effort to give Iraq the opportunity to move forward democratically as a sovereign nation, and we are still obviously very much in support of Iraq and the Iraqi government.  But ultimately, they have to make some key political decisions about governing in a non-sectarian way and an inclusive way, because only that will create the kind of stability that Iraq needs to move forward and protect its sovereignty.

Q    I know the President has ruled out putting combat troops on the ground in Afghanistan [sic], but he has notified Congress that up to 275 American forces are going to -- I’m sorry, going to Iraq.  Officials have said that he is considering Special Forces to do training missions there.  What does that say about his willingness to put Americans on the ground in a deteriorating security situation even if they are not there specifically for combat?

MR. CARNEY:  Well, first of all, we have had -- certainly prior to this circumstance -- many situations in which military personnel have been used and their numbers reinforced when it became necessary to protect embassy personnel.  And as you know, the decision over the weekend to send a number of teams totaling approximately 170 U.S. personnel to Baghdad from within the U.S. Central Command area of responsibility is about providing security assistance for embassy personnel inside Iraq.

They will engage in efforts to temporarily relocate some of our staff from the embassy to U.S. consulates in Basra and Erbil and to the Iraq Support Unit in Amman. 

Now, there have been a number of times when we have filed similar war power resolution letters when we have needed to augment existing security at our embassies, and this is consistent with that.  The military has also moved approximately 100 personnel into the region to provide airfield management security and logistic support if required.  But we are not -- that is a very discreet and distinct mission.   We are not, as the President has made clear, contemplating a return of U.S. troops back into combat in Iraq.

Q    But you are putting Americans into a country that has a crumbling security situation, are you not?

MR. CARNEY:  Well, again, for this absolutely important mission, which is to ensure the security of our personnel who are there -- and we have obviously, although we have reduced the number of personnel and have relocated and are relocating the ones that I mentioned, we do have a number of Americans there, and it’s the right thing to do to make sure we have the personnel necessary there to provide them the security they need.

Jeff.

Q    Jay, congratulations and good luck.

MR. CARNEY:  Thank you.  Is that it?  (Laughter.) 

Q    Is the President leaning one way or another on airstrikes?

MR. CARNEY:  If you read the news today you might be confused, and I think that that just reflects that the fact is the President is assessing the options available, and he is approaching this with the three objectives that I mentioned in mind.  And the one that involves contemplating direct action is part of the whole, the three objectives.  Ultimately, we can’t be in a situation where we are -- the United States and our military forces are the sole guarantor of stability in Iraq.  And I dare say that is a view held by a vast majority of people around the country and here in Washington.

What we can do is engage in an effort to make clear to the Iraqi government and leaders in Iraq that it is absolutely necessary for them, for their own medium- and long-term security and the cohesion of their country, to take steps to govern not in a sectarian way, but in a non-sectarian way, in an inclusive way, and to make clear that that is their objective.  And one of the reasons why we have seen the instability in portions of the country and the ability of ISIL personnel to make the gains that they have is because of the failures of the Iraqi government to govern in an inclusive way and to make it clear to all sectors of society in Iraq that the government represents and defends all of them.  And it is essential that the Iraqi leadership take steps to repair that situation.  That is an important element in our approach to Iraq right now.

Any action that he might contemplate when it comes to direct military -- the use of military force would be to deal with the immediate and medium-term threat posed by ISIL, and to make sure that our first and foremost objective in the region -- which is to deny extremists a safe haven is pursued and achieved -- those are the -- that’s the clear-eyed approach the President has when it comes to what our objectives are in Iraq.

Q    Can you give us a sense of a timetable on when that decision will be made?

MR. CARNEY:  I would not be able to do that for you.  I think that it is absolutely appropriate for the President to continue to both consult with Congress and to move forward, and when he has any announcements to make, he’ll make them.

Q    Just one last question.  Sunni militants attacked the largest oil refinery in Iraq today.  Is the White House concerned about oil disruptions?  And as Jason Furman referred to yesterday, are you considering tapping the SPR to deal with those disruptions?

MR. CARNEY:  I think there was some inaccurate reporting about what Jason said.  As you said, I don’t comment on that specifically except to say that we monitor the situation, we continue to monitor the situation.  When it comes to the question about concern over the price of oil and any effect that the circumstances in Iraq might have on that, we are monitoring continuously the global oil supply and the demand situation.  And my understanding is that at this point we have not seen major disruptions in oil supplies in Iraq. 

On the refinery that you mentioned, my understanding is that we have not seen, as I said, major disruptions in oil supplies from Iraq.  And the refinery itself produces for domestic Iraqi consumption and had stopped production already several days ago.  But this is obviously something that we monitor regularly, both localized in Iraq and any effect or impact on global supply. 

Q    Did markets misinterpret what Jason said about the SPR?

MR. CARNEY:  I’m not going to comment on markets.

Michelle.

Q    So the Iraqis at least twice now have asked for air strikes.  Obviously, the administration doesn’t feel like now is the time; they feel it’s the time.  So why doesn’t the President feel like now is the time to do something like that?

  MR. CARNEY:  Michelle, I think that it’s important, again, to look at the approach the President is taking here and understand that it is not -- the options that he is considering and the approach that he is pursuing is not one that is delineated solely by questions around the potential use of direct military action.

The only thing the President has ruled out -- and I want to be clear here -- is sending U.S. troops back into combat in Iraq.  But he continues to consider other options.  And obviously, work is being done that will help us see with more clarity what the options available to the President are as part of a cohesive strategy that includes working with the Iraqis and urging them to take action to demonstrate to all of the people of Iraq that the government is representing all of them, and that the security forces are engaged in an effort to fight a common threat to all Iraqis -- which is what ISIL represents.

ISIL does not have the interest of any Iraqis at heart.  It is a brutal, extremist organization that seeks to -- as we have seen in recent days -- capitalize on instability to terrorize the residents of Iraq and elsewhere for its own ideological purposes, again, that have no shared objectives with any of the citizens of Iraq.  And I think that the government, in our view, needs to move forward in a way that recognizes that there’s a shared interest in all of Iraq’s peoples joining together in the effort to combat the threat posed by ISIL.

Q    So it sounds like what you’re saying is you’re waiting for the Iraqis to show something or some kind of ability, either politically or militarily.  What does the administration think of their ability to hold Baghdad?

MR. CARNEY:  Well, I think that -- I know that others don’t let the lack of expertise get in their way when they comment on the situation on the ground and military capacities of Iraq security forces or of ISIL forces.  So I would urge you to consult true experts on that. 

We are looking at this through the lens of our national security interests.  And again, the President has not ruled out anything, except for sending U.S. combat troops into Iraq.  And he has also maintained the position that the United States retains the right to act in defense of our national security interests when the Commander-in-Chief views that as necessary, and he retains that right in this case and in all cases.

But again, taking direct military action by the United States will not solve Iraq’s challenges, certainly not alone.

Let me move up and back as I -- why should I change now.  Cheryl.

Q    Thank you, Jay.  And congratulations.

MR. CARNEY:  Thanks.

Q    Just so you won’t miss us, does the administration support a repatriation tax holiday to pay for the depleted Highway Trust Fund? 

MR. CARNEY:  Cheryl, I could always count on you in changing the subject, and I appreciate that.  (Laughter.)

The President does not support and has never supported a voluntary repatriation holiday because it would give large tax breaks to a very small number of companies that have most aggressively shifted profits and, in many cases, jobs overseas.  In 2004, just 15 firms got more than 50 percent of the benefits, with tax breaks worth billions of dollars on average.  The JCT -- as you know, Cheryl, probably better than anyone in this room -- predicts that a repeat of the 2004 repatriation holiday would cost nearly $100 billion over 10 years.

The President’s view is -- I mean, he’s put forward a plan for paying for the kind of infrastructure investments that we need, and he believes that that’s the right plan.

Justin.

Q    Congratulations, Jay.

MR. CARNEY:  We can stipulate that, if you guys want to.  (Laughter.) 

Q    I kind of wanted to follow up on what I asked you last week, which was both whether you guys feel like if you were to move ahead with any type of military strike, if you feel like the existing authorities kind of are there under maybe the authorization to go into Iraq the first time, under a different authority.  Some Senate Democrats have said that they think that you do need to go back to Congress.  And even if you do think that you do have that authority, whether the President feels in Syria that the nation would be stronger if he consulted Congress on this issue.

MR. CARNEY:  Well, he is consulting Congress, as you know, and we’ve discussed already.  When it comes to the AUMF that you mentioned, the Iraq AUMF, the Authorization for the Use of Military Force, the administration supports the repeal of the Iraq AUMF since it no longer is used for any U.S. government activities.  Now, we understand that some in Congress are considering legislation related to the Iraq AUMF, and we look forward to working with them.

I’m not going to engage in hypotheticals about action the President might take since, as we discussed earlier, he is still reviewing his options when it comes to direct action.  So I think I would say we’ll cross that bridge when we get there, if we get there.

Olivier.

Q    Thanks, Jay.  In light of the performance or the lack of performance of the Iraqi Armed Forces, is the President taking a fresh look at readiness reports coming out of Afghanistan?

MR. CARNEY:  Well, I think that the two countries are obviously different.  And we look at assessments of readiness in Iraq and Afghanistan in the context of the situation in each country.  We obviously have invested a lot of resources and paid a heavy price in both countries as part of our effort to allow governments in those countries selected by their people to secure their nations and produce for their people a better future. 

We have important relationships in both nations that include security assistance.  Obviously, Afghanistan we still have many troops there in an advise-and-assist mission at this time.  But I think it is important to note that we as a country engage in an effort to help stand up Iraqi security forces and train them and support them.  We continue in that effort.  We have missions even to this day absent a presence of U.S. troops in Iraq that still assist in the training and supporting of Iraqi security forces.  But ultimately, the challenges that we have seen reflected in the inability of those security forces to control portions of the country reflect the failure of the government to govern effectively in a cohesive and inclusive, non-sectarian way. 

And we can take steps to help deal with -- help the Iraqi people and the Iraqi government deal with the immediate threat posed by extremist groups like ISIL.  But in the medium and long term, it absolutely has to be Iraqi leaders who take the steps necessary to ensure that the security forces are up to the task and will provide security for the whole country and for all citizens of that country and all regions of the country.

Q    So no new look at the Afghan approach?  This isn’t a cautionary tale for the effort --

MR. CARNEY:  I think that we are constantly -- our teams are evaluating the effort that continues to improve the capacities of the ANSF, and that effort will continue.  We obviously have a circumstance in Iraq now that requires assisting Iraq in efforts to deal with the immediate threat posed by extremists and assisting them as they hopefully make the choices necessary to succeed in the medium and long term in dealing with the challenges they face.

Jon.

Q    Jay, getting back to this question of authorization -- when the President was considering airstrikes against Syria, he made the decision that he would first go to Congress to get authorization for an attack on Syria.  Is he considering anything similar regarding Iraq?  Does he believe that he would need or would prefer to have congressional authorization before launching airstrikes on Iraq?

MR. CARNEY:  I’m not going to engage in hypotheticals about decisions that the President may or may not make with regards to the use of U.S. military force in Iraq.  I would note at least for the sake of clarity, the differences you would see in those circumstances, where in this case, as someone noted in an earlier question, the sovereign government of Iraq has requested assistance.  But beyond that, I’m not going to speculate --

Q    Does that make a significant difference?

MR. CARNEY:  Beyond that, I’m not going to -- well, I think it certainly is a distinction and difference worth noting.  I’m not going to get into, again, hypotheticals about decisions the President has not yet made.

Q    Just to -- why would that make a difference?  I understand on many levels why it would make a difference, but in terms of congressional authorization?  Because Congress would be authorizing the use of military force, not whether or not the other government was inviting us, right?  It’s a question of whether or not the President has that authority now.  I’m just asking if the White House believes he has the authority.

MR. CARNEY:  Well, I know.  And that question was asked earlier, and I’m not going to speculate about an issue that has not come to pass.

Q    Okay.  And I’m sure you’ve had a chance to -- or you’ve seen this op-ed piece that former Vice President Dick Cheney has written in the Wall Street Journal and has a rather critical tone to it, towards the White House.  He says, “Rarely has a U.S. President been so wrong about so much at the expense of so many,” talking about the situation in Iraq and in the Middle East generally. 

MR. CARNEY:  Which President was he talking about?  (Laughter.)

Q    I believe he was talking about President Obama.

MR. CARNEY:  Look, it’s obviously always good to hear from former Vice President Cheney.  You and I each know him reasonably well.  I think many others have said that it’s pretty clear that President Obama and our team here have distinctly different views on Iraq from the team that led the United States to invade Iraq back in 2003.  So he’s entitled to his opinion.

Q    Jay, can I ask you in two specifics of what he says, though?  On one he says that terrorists, the group ISIS is taking over more territory and resources than any terrorist group before in history, and the President goes out golfing; that he seems blithely unaware or indifferent to the fact the insurgent al Qaeda threat poses a clear and present danger to the United States.  So your reaction to the Vice President saying that the President is out golfing when he should be paying attention to this, and he seems unaware or unconcerned?

MR. CARNEY:  I think it’s pretty clear the President has been paying close attention to this and been engaging regularly with his national security team.  It’s also clear that the President is being very deliberate about decisions surrounding the question of the use of American military force.  And his belief is that we should always be very deliberate in that kind of decision-making process and that we should very carefully weigh the consequences, both desired and undesired, that can come from the use of U.S. military force, and we should have a very clear focus in mind about what our national security objectives are and what we, the United States, can achieve through military force as opposed to what, in this case, the sovereign nation of Iraq and its security forces can and must achieve -- unless the proposition is, as some in the past have suggested, the United States should have had occupied Iraq in perpetuity.  That's simply not the President’s view -- President Obama’s view.

Kristen.

Q    Jay, thanks.  Based on some of the latest reporting that I have seen, the rebel forces are about 40 miles north of Baghdad.  Is that consistent with your understanding?  And I know you don't want to give a specific timeline, but can we still expect the President to make a final determination in a matter of days as opposed to weeks given that?

MR. CARNEY:  There is a lot of work that is ongoing at the direction of the President around the situation in Iraq.  He is continuing to consider options consistent with the ongoing war, and he has not ruled out any options beyond deploying U.S. troops back into combat in Iraq.  So beyond that, I'm not going to get into timetables, except to say that a lot of work is going on already around the general proposition that I laid out in the beginning of this briefing and the three objectives we have that have to govern an approach to Iraq that has anything but the  absolute short term in mind.

So when it comes to assessments of what’s happening on the ground, again, as I said earlier, I will refrain where others have not and not pretend to be an expert on the situation on the ground.  I would refer you to those who are.

Q    The President has said that any action taken by the U.S. would depend upon Nouri al-Maliki creating a more inclusive government.  Have you seen any steps that he has taken that you can point to to suggest that he’s actually done that?  Or is he hunkering down as other people have said?

MR. CARNEY:  Well, first of all, it is absolutely I think self-evident that the future of a nation like Iraq with its diverse population is dependent upon the willingness of its leaders to govern inclusively -- at least the cohesion of the nation is dependent upon that.  And that has been a proposition that we have been discussing with Iraq’s leaders for a long time, and it remains true today.  And there’s no question that not enough has been done by the government, including the Prime Minister, to govern inclusively and that that has contributed to the situation and the crisis that we have today in Iraq.

And this is a democratically elected government.  It is a country that has just undergone another election and which is in the process of the formation of a new government.  And what is obviously clear is that Iraq and the people of Iraq choose their leaders, and we can only be clear that all of Iraq’s leaders must -- about what they must do to unify the country and the people and effectively confront this threat.

I would point out when it comes to the steps the President can take or might consider, they are part of a whole package.  What is also true is that our primary objective is to not permit extremist groups like ISIL from establishing a safe haven.  And the surest way to achieve that is for the government of Iraq to govern in a way that is inclusive, and that by being inclusive more effectively establishes security and stability throughout the country.

Q    If not enough has been done, as you say, then should Maliki step down?

MR. CARNEY:  That's not obviously for us to decide.  As I noted earlier, this is a country that has had democratic elections.  There was a recent election that produced results that requires the formation of a coalition government.  That has, at least in recent past, been a process that takes some time.  Given the circumstances, moving expeditiously is obviously a good idea.  But that is something for the Iraqi people to decide, not for the United States or any outside nation to decide.

Regardless of the decision about who is prime minister or what that government looks like, we will make the case that Iraq’s leaders need to proceed in a way that is reflective of the interests of all of Iraq’s citizens and all regions of the country and all parties and religious affiliations.  That is the only way for a nation like Iraq to succeed ultimately in the medium and long term.

Q    And just one more on a completely different topic.  Does the President have a reaction to the fact that the Redskins trademark was cancelled today?

MR. CARNEY:  I haven't spoken to the President about that news, but I would note that last October, in an interview with the Associated Press, he was asked about the issue of the team name and said, “If I were the owner of the team and I knew that there was a name of my team, even if it had a storied history, that was offending a sizable group of people, I'd think about changing it.”  So that's the President’s view.  I have no new view of his to provide to you.

The decision today was made by the Trademark Trial and Appeal Board.  I think maybe Cheryl knew that existed prior to this, but I bet most of you didn’t.  (Laughter.)  And it’s an independent administrative tribunal within the Patent and Trademark Office.  The board is authorized to determine a party’s right to register a trademark with the federal government, or if the party already owns a registration, its right to maintain it.  The board is not authorized to determine whether a party has the right to use a trademark, just whether it has the right to register it.

So for more on this, I would encourage you to contact the United States Patent and Trademark Office.

Major.

Q    Jay, can you describe the limits of the White House willingness to cooperate with Iran dealing with the crisis in Iraq?

MR. CARNEY:  I can tell you that we are open to engaging the Iranians, just as we are engaging other regional players on the threat posed by ISIL in Iraq.  As you know, the issue did come up briefly between Deputy Secretary of State Bill Burns and Iran on the margins of the P5-plus-1 in Vienna on Monday.  There may be future discussions at lower levels, Major, though we do not expect the issue to be raised again during this round of P5-plus-1 nuclear discussions in Vienna.  And to be clear, any discussion about Iraq is separate and will be separate from ongoing nuclear talks. 

On the broader question, in any possible conversations with Iran we would encourage the Islamic Republic of Iran to act in a responsible, non-sectarian way, and to encourage the government or Iraq and all Iraqi leaders to do the same.  Iraq’s sovereignty must be respected, and the government of Iraq must focus now on strengthening its internal political and security institutions in a non-sectarian way.  And the solution to Iraq’s security challenge does not involve militias, but the strengthening of the Iraqi forces to combat threats.

Any engagements we have with the Iranians will not include discussion of military coordination or strategic determination about Iraq’s future over the heads of the Iraqi people.

Q    Do you want the Iranian government to rescind its general call for Shiite militias to protect religious shrines in Iraq?

MR. CARNEY:  I would say that ISIL is clearly a threat, a common threat to the entire region, including Iran, but Iraq will only successfully overcome this threat by governing in a non-sectarian manner, building and investing in the capacity of Iraq’s security forces and addressing the legitimate concerns of Iraq’s Sunni, Kurd and Shia communities.  Turning to Iran is not going to accomplish these important steps and it won't solve Iraq’s problems. 

Iraq’s leaders need to make decisions that reinforce the idea for all of Iraq’s citizens that the government represents all of them and defends all of them.  And governing in a sectarian way or reinforcing a perception that the central government is pursuing sectarian interests is not a recipe for success when it comes to dealing with the common threat posed by ISIL.

Q    As the process to form this coalition government plays itself out after the most recent election, is Nouri al-Maliki the optimal leader of that process?  Would there not be a better chance of it succeeding if he and those closest to him were open to a possible alternative?  And would the United States be supportive of an alternative?

MR. CARNEY:  We don't choose Iraq’s leaders.  We encourage all of the leaders of Iraq, in this government and in the future government that has to be formed as a result of the recent elections, to pursue non-sectarian governance.  That is the way that Iraq can successfully maintain its security --

Q    Considering his history, is Maliki the optimal figure to do that?

MR. CARNEY:  Again, it's not for us to make that decision on behalf of the Iraqi people.  

Q    Do we have an opinion?

MR. CARNEY:  The Iraqi people will have to decide the makeup of the next coalition government and who is the prime minister. Whether it's the current prime minister or another leader, we will aggressively attempt to impress upon that leader the absolute necessity of rejecting sectarian governance, rejecting an approach to Iraq’s security that has sectarian goals in mind, but rather governing and pursuing security in an inclusive, non-sectarian way. 

That’s the only way the divisions within Iraq are managed and healed in a manner that will allow for Iraq to prosper in the future.  That has always been the case.  And we have, as a country, expended a lot of our most precious resources in an effort to give Iraq the opportunity to govern itself as a sovereign nation and a democratic nation, and to take responsibility for the security of the nation.  We continue to have an important assistance relationship with Iraq, and we always in a circumstance like this continue to be focused on our national security interests and potential threats against the United States, and our people and our allies.

But ultimately, the Iraqi people have to decide their future.  We’re there as a partner and a friend, but they have to decide.

Q    Last question.  It’s clear the President would like many questions answered; among them are these:  Can you give me reliable, target information on the ground?  And the absence of that is in part related to the lack of U.S. eyeballs on the ground to provide not only the target but the assessment of what would be successful or not successful.  Other things you would like to have answered is an assessment of the fighting will and capacity of those security forces in and around Baghdad.  Does the President’s declaration that there will be no combat forces prevent him from sending those who might be best skilled at answering those questions to Iraq to find out those answers to give him better options?

MR. CARNEY:  The President has been clear, as I have again today, that that is not an option he is considering.  We are not sending U.S. troops back into combat in Iraq.  But that’s the only option he’s ruled out.  We are obviously assessing a variety of different options.  We’re pursuing an approach that has as only one component the contemplation of direct action we could take.  The questions you asked at the beginning about fully understanding the objectives that could be achieved by direct action is absolutely appropriate.

But as I mentioned earlier, a whole lot of work is being done as part of the President’s approach to this challenge.  And when he has any decisions to announce, he’ll announce them.  And in the meantime, I think you can be sure that we are taking an approach to Iraq that is governed by our view of what not only we can do to assist Iraq, but what Iraq must do to assist itself.

Q    Just to make sure I understand, sending people to try to answer those questions would constitute sending combat forces?

MR. CARNEY:  No -- I’m not going to get into hypotheticals about how we make assessments about the situation on the ground.  What I have made clear is that the President is ruling out sending U.S. troops back into combat.  We obviously have a lot of efforts underway that allow us to assess the situation, allow the President and his team to assess options.

Ed.

Q    Jay, Congratulations.

MR. CARNEY:  Thanks.

Q    Ahead of this important meeting at three o’clock with congressional leaders, some of the Republican leaders are saying ahead of that that they think the worst option would be for there to be no U.S. action.  But from some of your earlier comments, you seem to suggest that, as the President once delivered here, that if he has a decision to announce, he’ll announce it.  Does that suggest that one option on the table is no U.S. military action?

MR. CARNEY:  Again, I think it’s -- any time you say, as the President has on many occasions, that he’s not ruling out, and never does, the use of military force in a circumstance like this, that’s not ruling in or saying there is a certain use of military force. 

Q    I just want to be clear.  So it’s not a foregone conclusion that there will be U.S. military action.  He may decide that the Iraqis do not have a strategy, and he might not feel like using U.S. military force makes sense.  Is that right?

MR. CARNEY:  Well, the President will make decisions based on his view of what’s in the best interest of the United States and our national security.  We obviously have, as the President said last Friday, a keen interest in the region because of the potential threat that a safe haven for an extremist group like ISIL could pose to the United States.  That is why the President is considering a variety of options.  That’s part of an approach, again, that is not limited to -- although it gets the most attention -- not limited to this consideration.

Q    When you talk about ISIL and their influence, one thing that former Vice President Cheney mentioned in that op-ed that was talked about before is the President’s recent New Yorker interview where he talked about how there’s a big difference between al Qaeda central, bin Laden having a network that’s trying to launch attacks against U.S. homeland.  And then you’ve got these splinter groups like an ISIL, or ISIS as some call it, that might not be able to launch terror attacks.  But now people are saying, well, wait a second, maybe they can take over an Islamic state and turn it into an Islamic state and launch attacks. 

And the President said in that interview with the New Yorker, “If a JV team puts on Lakers uniforms, that doesn’t make them Kobe Bryant.”  Did the President misjudge the influence of some of these al Qaeda offshoots that maybe they could launch terror attacks against the U.S.?

MR. CARNEY:  The President has been very clear, as have the senior members of his national security team, that our principal concern has been for some time those al Qaeda affiliates that have demonstrated that they pose, at least potentially, the most direct threat to the United States or people in our interest.  That would obviously include AQAP, and it could potentially include ISIL.

And so we have been very focused on these regional affiliates and the threat that they pose as core al Qaeda has been diminished.  It was certainly the right thing to do to diminish core al Qaeda, to go after the central governing authority and decision-makers who perpetrated a catastrophic attack against the United States on September 11th, 2001.  I hope senior members of the previous administration would agree with that and the objective that was pursued and has in substantial measure been achieved. 

That doesn’t mean that we don’t oppose other substantial threats.  The President and every member of his national security team has been very clear about that.  And we have -- as you have seen, as a nation -- in our collaborative relationships with other nations as well as acting on our own -- taken action where we can mitigate the threat posed by extremist groups to the United States.  And we’ll continue to do that.

Q    And to deal with this threat, you were telling Major how important it is to press Prime Minister Maliki to reform.  If that’s the case, why did the President have Vice President Biden call Maliki last week?  Why hasn’t the President called Maliki directly to make this case? 

MR. CARNEY:  I think the President’s views are very clear.  The President has had conversations with Prime Minister Maliki in the past that include this very issue.

Q    When was the last time they spoke?

MR. CARNEY:  The Vice President of the United States has obviously keen expertise and very deep relationships in Iraq among all of the leaders there.  In the two years that I served as his communications director, I believe we went there seven times.  And he has certainly been there often since then.  And it’s entirely appropriate that the Vice President of the United States speak directly with leaders in Iraq, as he has consistently for so many years.

Q    One other topic before you go.  What happened to Lois Lerner’s e-mails?

MR. CARNEY:  Ed, I would refer you to the IRS, and they’ve answered this question.  They can answer it again.

Q    Given the fact that they were requested I think about 10 months ago and it was just Friday when Congress was informed that they’ve apparently been missing, will the White House pledge at least to guarantee that you will work to find them -- since previous officials at the IRS have testified to Congress under oath that there’s backups of these e-mails?  So do you think -- you’ve previously said you’ll cooperate with legitimate oversight.  Is it legitimate to find these e-mails?

MR. CARNEY:  As the IRS has said, Ed, they are producing 67,000 e-mails sent or received from Lois Lerner.  This is part of their production of 750,000 pages of documents to Congress.  As the IRS said, IT professionals worked to restore Lerner’s hard drive but were unable to do so.  Nonetheless, the IRS has or will produce 24,000 Lerner e-mails from this 2009-2011 time period largely from the files of the other 82 individuals.  So I think that answers your question that they are engaging in an effort to find e-mails in the absence of being able to restore the hard drive.

Q    So the White House will make sure that as many as possible that can be recovered will be recovered?

MR. CARNEY:  The IRS obviously is taking action that I just described to you to supply, in addition to the 750,000 pages of documents to Congress they’ve already supplied, additional e-mails as they can be recovered. 

Chairman Camp, as you know, requested e-mails to and from the White House.  We were asked if we would produce them; we did, in fact, do a search for all communications between Lois Lerner and any person within the Executive Office of the President for this period.  We found zero e-mails -- sorry to disappoint -- between Lois Lerner and anyone within the EOP during this period.  We found three e-mails where a third party e-mailed both Lois Lerner and officials within the EOP.  One was a spam e-mail and two others were from a person seeking tax assistance.  Each of these e-mails has been produced to Congress.

Q    -- were also trying to seek her e-mails with members of Congress and staff on the Hill, I believe, right?

MR. CARNEY:  Again, I think the IRS is demonstrating that it is undertaking this effort.

Mara.

Q    Thank you for a hard job well done.  Congratulations.

MR. CARNEY:  Thank you, Mara.

Q    A question -- if the primary national security objective of the U.S. is to deny extremists a safe haven, and the most efficient way is for Malaki to form -- govern in a non-sectarian manner, has the President come to any conclusions about whether that is the only way?  In other words, barring those reforms, is there anything that we can do on our own, short of occupying Iraq, to achieve that objective?  I’m not asking what he has decided to do, just whether he thinks it’s even possible.

MR. CARNEY:  There are several levels of hypotheses to that, but I’ll try to tackle it this way.  It is certainly the best way to ensure that an extremist group cannot establish a safe haven in Iraq and this region.  And that is why it is important to be clear about the three pieces, the elements that I talked about:  How to deal with the urgent threat from ISIL; how to help build the capacity of the Iraqi security forces to fight this threat in both the short and long term; and how to encourage Iraq’s leaders to put aside their differences and facilitate non-sectarian cooperative governance.

It is always the case that when it comes to threats to the United States, the American people, our interests and our allies, we and the President, obviously, as Commander-in-Chief, take action as he sees fit.  I think that’s the best way I can answer your question.  But ultimately, setting aside assistance we are providing and other assistance we might provide in the effort to deal with the urgent threat posed by ISIL, Iraq’s leaders need to take the steps that we’ve discussed.  And that is the surest and best way -- as it has ever been -- short of a permanent occupation by the United States, short of that -- of assuring that Iraq is a sovereign, secure nation that doesn’t provide a safe haven to these extremist groups.

Q    But two of those three goals that you mentioned -- building the capacity of the Iraqi military and facilitating non-sectarian governance -- those were our goals before 2011, before we left.  We had more leverage then.  Now that we’re gone, how do we achieve those goals when we’re not there and we couldn’t achieve them when we were there?

MR. CARNEY:  Well, first of all, we still have a very important and substantial relationship, including an assistance relationship with Iraq.  But I think your question in many ways provides the answer, which is that it has always been and will always be the case that Iraq must take responsibility for its own security, ultimately.  They will have and do have in the United States a partner in that effort, but Iraq is a sovereign nation with a democratically elected government, and they need to act and make decisions at the political level to ensure that we have in that country, for the sake of the Iraqi people, the potential for a better future.

Juliet, then Connie.

Q    Since a couple former Vice Presidents are weighing in on public policy matters, Al Gore wrote today that the President has signaled he is likely to reject the presidential permit for the Keystone pipeline.  Can you share -- has there been any private discussion between the former Vice President and the President that would lead him to this conclusion?

MR. CARNEY:  The President’s position, our position on the pipeline has not changed.  The process that is housed at the State Department continues.  And I’ve seen that report, but I don’t have any light to shed on it.  The process continues.  It’s being run by the State Department in keeping with past practice of administrations of both parties. 

Connie.

Q    Thank you.  Just to wrap up -- are Americans any safer now because of what happened in Iraq and Afghanistan?  And secondly, shall we keep one of the seats warm for you in the press room?  (Laughter.)

MR. CARNEY:  I can definitively answer one of those questions.  (Laughter.)  Connie, I think that our men and women in uniform, principally; their families, principally; our civilian Americans who served in harm’s way in those countries provided extraordinary service, and in doing so have made our country safer.

There are, obviously, issues around the decision which then-state senator Obama opposed to invade Iraq that historians will chew over for a long time.  But there is no question and no debate about the extraordinary service provided by our men and women in uniform, and by those who supported them, and that we all benefit from that and we are all grateful for that, from the Commander-in-Chief on down.

But this is not, when it comes to the safety and security of the United States and the threats posed by those who would do us harm, this is an ongoing proposition, and it’s one that the Commander-in-Chief and his successors will always be vigilant about.  And that is why, as we discussed earlier, we keep our eyes on emerging threats even as we deal with the threats that were present when we got here.  And that will continue to be the case, I am very confident, even as I step away from this podium, which I’m about to do.

Q    Thanks, Jay.

MR. CARNEY:  Thank you all very much.  (Applause.)

MR. MCDONOUGH:  Jay, before you go, I just wanted to come and say in front of all your close friends here -- on behalf of your team and on behalf of the President, thank you.  I want to say thank you to you.  I want to say thank you to Claire.  I want to say thank you to Hugo.  And I want to say thank you to Della.

We are going to miss you dearly.  You have done unrelenting good work and unrelenting good service for us, and we’re deeply appreciative in how you deal with our partners here in the press. So, Jay, thank you very much.  We’re going to miss you dearly.

MR. CARNEY:  Thanks.  (Applause.)

Thank you all very much.  I’m sure we’ll see each other again.  Take care.

Q    Jay, is this your last day?

MR. CARNEY:  (Laughter.)  Yes.  Oh, no, not at the White House, sorry.  My last briefing.  A couple more days here.

Q    You can take the question.

MR. CARNEY:  I’ll take that question.

Q    So when do you give Josh the launch codes and everything?

MR. CARNEY:  Oh, I couldn’t possibly reveal that.  (Laughter.)  Thank you all.

Q    Jay, I wish you all the best.

MR. CARNEY:  Thank you, sir.  Bye-bye.

END
2:17 P.M. EDT

The White House

Office of the Press Secretary

Readout of the President’s Meeting with Congressional Leaders

President Obama met today with Senate Majority Leader Reid, Speaker Boehner, Democratic Leader Pelosi and Senate Minority Leader McConnell to discuss the situation in Iraq. The President provided an update on the Administration’s efforts to respond to the threat from ISIL by urging Iraq’s leaders to set aside sectarian agendas and to come together with a sense of national unity. He also reviewed our efforts to strengthen the capacity of Iraq’s security forces to confront the threat from ISIL, including options for increased security assistance. He asked each of the leaders for their view of the current situation and pledged to continue consulting closely with Congress going forward.

The White House

Office of the Press Secretary

Remarks by the President at the White House Maker Faire

East Room

12:02 P.M. EDT

THE PRESIDENT:  Thank you.  (Applause.)  Thank you so much.  Everybody, have a seat.  Thank you.  Well, good morning.  And welcome to the first-ever White House Maker Faire -- which is pretty exciting.  (Applause.)  Let me start off by saying, the only thing that I asked my staff about is why is there an “E” at the end of “faire.”  (Laughter.)  I mean, I wasn’t sure -- is there jousting?  Do we all have to get dressed up, or what?  So I’m just warning you -- next year, the “E” may be gone.  I don’t know exactly who came up with that.  This is America -- we don’t have E’s at the end of “fair.”  (Laughter and applause.)  I’m just saying.  I’m just saying.  Whoever came up with that idea, you let me know. 

We’ve got three outstanding members of Congress who are here.  Bill Foster.  (Applause.)  Rush Holt.  (Applause.)  And Russ [sic] Takano.  We’ve got National Science Foundation Director France Cordova, who’s here.  France.  (Applause.)   Our NIH Director Francis Collins.  (Applause.)  My science advisor, John Holdren.  (Applause.)  We’ve got innovators like Dale Dougherty, who’s here, who helped launch the very first Maker Faire nearly a decade ago.  Dale, stand up.  (Applause.)  We have Intel’s youngest intern, who I know because he’s probably the only person who was ever allowed to fire a marshmallow in the White House.  (Laughter.)  Joey Hudy -- where’s Joey?  There he is.  (Applause.)  There’s still a stain -- (laughter) -- from where the marshmallow hit.  It was scary.  The thing just went out a little -- you don’t want to be at the receiving end of that marshmallow.  He also brought, by the way, his “3x3x3 LED Shield,” which is his. 

And we’ve got some wonderful folks like our Science Guy, Bill Nye, who’s here all the time.  (Applause.)  And Mr. Kamen, a great inventor.  So this is a smart group right here.  There are some innovative folks.
  
Before I begin, I have to ask:  What on Earth have you done to my house?  (Laughter.)  I mean, there’s a mobile factory on the South Lawn.  There’s a robotic giraffe.  There’s a giant red weather balloon in the Rose Garden.  There’s a paper-crafted dinosaur head in the hallway.  Over here is a 3D-printed sculpture of my State of the Union Address.  (Laughter.)  Clearly, there could have been some edits right there in the middle.  (Laughter.)  The sculpture clearly goes on too long.  (Laughter.)  So this is not your typical day at the White House. 

We invited you here because today is “D.I.Y.”  Today’s D.I.Y. is tomorrow’s “Made in America.”  Your projects are examples of a revolution that’s taking place in American manufacturing -- a revolution that can help us create new jobs and industries for decades to come. 

And five years after the worst economic crisis of our lifetimes, our businesses have created jobs for 51 straight months -- that’s 9.4 million new jobs in total.  But we know we’ve got to create more.  And one of the best ways to create more good jobs is by boosting American manufacturing.  

So we’ve seen an auto industry that’s come roaring back, and our manufacturing sector has been adding jobs for the first time since the 1990s; about 640,000 new manufacturing jobs since February of 2010.  And in the absence of much action from Congress, we’re doing what we can, I’m doing what I can on my own to keep that progress going.  So I’ve launched four new high-tech manufacturing hubs across the country, with more on the way.  Yesterday, I went to the TechShop in Pittsburgh, where you can use equipment like laser cutters and 3D printers for about the cost of a gym membership.  We announced new steps that we’re taking to help entrepreneurs turn their ideas into products.  More than 90 mayors made commitments to help entrepreneurs manufacture new things in their communities, and we’re proud to have some of those mayors here today.

So we’re going to do whatever we can to bring good manufacturing jobs back to our shores, because our parents and our grandparents created the world’s largest economy and strongest middle class not by buying stuff, but by building stuff -- by making stuff, by tinkering and inventing and building; by making and selling things first in a growing national market and then in an international market -- stuff “Made in America.”

And the good news is, is that new tools and technologies are making the building of things easier than ever.  There is a democratization of manufacturing that is potentially available because of technology.  Across our country, ordinary Americans are inventing incredible things, and then they’re able to bring them to these fairs like Makers Faires.  And you never know where this kind of enthusiasm and creativity and innovation could lead.  So in the 1970s, Steve Wozniak designed the Apple One to show off for the members of the “Homebrew Computer Club.”  And today, Apple is worth about $550 billion.  I wish I had been there.  (Laughter.)  I’d like to think that I would have said, that’s a good idea.  (Laughter.)  Here, take my $100.  (Laughter.)

And while I don’t know if the projects here today are the next Apple, I do know that by looking at some of these exhibits, it was just incredible what is being done. 

So you take the team from The Workshop School in West Philadelphia, and compared to most other schools there are a lot of advantages they don’t have.  This is a poor community.  They do have, however, Simon Hauger, a principal who is so talented, a student once said, “He could teach algebra to a guinea pig.”  (Laughter.)  And with Simon’s help, we’ve got Derrick Bell here, Taliya Carter, Joshua Pigford.  Their team built a biodiesel sports car that gets around a 100 miles per gallon, which is why the Secret Service didn’t let me drive it.  (Laughter.)  

But what’s happening is, is that the young people now are able to learn by doing.  So math, science all gets incorporated into the task of actually making something, which the students tell me makes the subject matter that much more interesting.  Or you’ve got Jen McCabe, who is setting up a space called Factorli, in Las Vegas, to provide custom, small-scale manufacturing -- kind of like a Kinko’s or a copy shop, but instead of printing flyers, they’re going to be able to print custom parts for American products. 

There’s Marc Roth, from San Francisco.  A few years ago, Marc found himself homeless.  And at a shelter, Marc heard about a local “TechShop” that teaches folks how to use new tools like laser cutters and 3D printers, and he signed up.  And within 16 months, he had started SF Laser, his own laser-cutting business. He just launched a program called “The Learning Shelter” to teach tech and manufacturing skills to other folks who are trying to get back on their feet.

As you were going through the exhibits, you saw young people who are students at places like MIT helping to design mobile factories that bring the tools for invention to communities that might have thought that kind of stuff was out of reach for them.  An incredible story of a young woman who figured out how to make a cheap incubator that’s already helping 60,000 newbies around the world who can’t afford the sort of expensive equipment that we have in our hospitals. 

It gives you a sense that we are at the dawn of something big.  And one of the professors who I had a chance to speak to as I was taking the tour described it as analogous to where we were with the Internet 25, 30 years ago.  In the same way that we were at that time reorganizing how we could use data and information, we are now at a point where we’re going to be able to reorganize how we think about making things and marrying the information revolution to what’s been an analogue manufacturing system.  And it’s incredibly exciting and we’re at the cutting edge of it, but we’ve got to make sure that we continue to be at the cutting edge of it.

So as a country, we ought to be doing what Simon, and Jen, and Marc are doing every day, and we’ve got to make sure that more Americans have the skills and opportunities to land a job in a growing industry, or to create entirely new industries.  So that’s why I’m declaring today a “National Day of Making” -- and it’s why I’m backing those words up with action. 

We’re helping schools take shop class into the 21st century, because one of the things I’m really interested in is how do we redesign high schools so that young people are able to do stuff as they are learning.  And that’s not just true for schools in inner-city Philadelphia, that’s true for schools generally, in part because it also then gives new opportunities for young people who may have different learning styles to thrive in ways that they might not if they’re just sitting there listening to a lecture.

We’re providing new support for startups that want to file for a patent.  From the Defense Department to the SBA, and from the National Science Foundation to NASA, we’re doing more to help entrepreneurs start new businesses that make things in America. 

And of course, this is not just a job for government.  Today, more than 150 colleges and universities are committing to giving young people more hands-on opportunities to make things.  So a few minutes ago, a young man named Partha Unnava showed me the letter announcing that commitment -- and of course, it was on some metal that was 3D-printed.  He couldn’t just give me a piece of paper.  (Laughter.)  It’s harder to file, by the way, but it looks cooler.  (Laughter.)

The private sector is stepping up, as well.  From Indiegogo and Etsy to Disney and Intel, companies have pledged to help unleash a new wave of innovation here in America.  And these companies do different things, they come from different industries, but they share the belief that when we tap the potential of every American, all of us are better off.  

Camille and Genevieve Beatty are here today from Asheville, North Carolina.  They’re 14 and 12 years old.  Where are they?  Raise your hands, guys.  There you are.  (Applause.)  They happen to be the co-founders of Beatty Robotics.  Genevieve does the wiring, Camille machines the metal.  As their website puts it, “Who needs a paper route when you can start a robotics company?”  (Laughter.)  That’s a pretty good motto.  That’s great, I love that.  (Laughter.)  

But the Beattys say one of the main things they’ve learned over the last few years isn’t about power tools or engineering or electronics.  What they’ve learned is that, “If you can imagine it, then you can do it -- whatever it is.”  And that’s a pretty good motto for America. 

This is a country that imagined a railroad connecting a continent, imagined electricity powering our cities and towns, imagined skyscrapers reaching into the heavens, and an Internet that brings us closer together.  So we imagined these things, then we did them.  And that’s in our DNA.  That’s who we are.  We’re not done yet.  And I hope every company, every college, every community, every citizen joins us as we lift up makers and builders and doers across the country.  If we do, I know we’re going to be able to create more good jobs in the years to come.  We’re going to create entire new industries that we can’t yet imagine, although I suspect Camille and Genevieve may have already figured it out.  (Laughter.)

And we’re going to rebuild our economy and restore our middle class, and give opportunities for people whose potential is not yet tapped.  There are kids out there, there are adults out there right now who have a great idea.  And they don’t have access to the capital they need.  They don’t have the tools they need to put together a prototype.  They don’t know how to link up with folks who could help refine those ideas.  And what the Maker movement does, what technology does, what the information revolution does is it allows all those folks to suddenly be a part of this creative process.  And what better place to do that than here in the United States of America? 

This is a place where we know how to invent and we know how to dream and we know how to take risks.  And this is a place where people who work hard have always been able to make it.  We want to make sure that continues.  So thanks for the great work you’re all doing.  It’s very inspiring. 

God bless you.  God bless the United States of America.  Thank you.  (Applause.) 

END  
12:17 P.M. EDT

The White House

Office of the Press Secretary

FACT SHEET: President Obama to Host First-Ever White House Maker Faire

A Nation of Makers: Empowering America’s Students and Entrepreneurs to Invent the Future

Today, President Obama will host the first ever White House Maker Faire and will meet with students, entrepreneurs and everyday citizens who are using new tools and techniques to launch businesses, learn vital skills in science, technology, engineering, and math (STEM), and lead a grassroots renaissance in American manufacturing. 

As part of his year of action and this week’s focus on efforts that will expand opportunity by spurring manufacturing, innovation and entrepreneurship, the President will also announce new steps the Administration and its partners are taking to increase the ability of more Americans, young and old, to have access to these tools and techniques and to bring their ideas to life.

Among the efforts being launched by the President at the White House Maker Faire:

  • Helping Makers launch new businesses and create jobs, with more than 13 federal agencies and companies including Etsy, Kickstarter, Indiegogo, and Local Motors offering Makers a suite of support services including expanded access to start-up grants, strong relationships with American manufacturers and major retailers, and business mentoring and training.
  • Dramatically expanding the number of students that have the opportunity to become Makers, with the Department of Education and five other agencies; over 150 colleges and universities; more than 130 libraries; and major companies ranging including Intel, Autodesk, Disney, Lego, 3D Systems, and MAKE committing to create more Makerspaces, enlist more educators in teaching Making, and launch other programs that allow students access to the tools and mentors that will bring their ideas to life. 
  • Challenging Makers to tackle our most pressing problems, from Maker Nurses prototyping new tools that will aid in patient care, to Makers expanding our frontiers in space, to Makers here and abroad developing low-cost technologies that can improve the livelihoods of the world’s most vulnerable people.

America has always been a nation of tinkerers, inventors, and entrepreneurs. In recent years, a growing number of Americans have gained access to technologies such as 3D printers, laser cutters, easy-to-use design software, and desktop machine tools, with even more being created by the day. These tools are enabling more Americans to design and build almost anything.

The rise of the Maker Movement represents a huge opportunity for the United States. Nationwide, new tools for democratized production are boosting innovation and entrepreneurship in manufacturing, in the same way that the Internet and cloud computing have lowered the barriers to entry for digital startups, creating the foundation for new products and processes that can help to revitalize American manufacturing.

These tools, increasing access to nearby makerspaces, and events like Maker Faires across the country are inspiring a new generation of entrepreneurs, empowering Makers to launch manufacturing startups in the same way that Steve Wozniak and Steve Jobs developed and marketed the first Apple Computer while participating in the Homebrew Computer Club.  Mentors and educators are “passing it on” and inspiring boys and girls to invent, tinker, and learn vital skills in STEM education.

The first-ever White House Maker Faire comes just one day after the President visited TechShop Pittsburgh, a makerspace and fabrication studio where individuals can build and test their own products. During his visit, the President highlighted new efforts by his Administration and by more than 90 mayors to spur manufacturing innovation and entrepreneurship. Read more about their efforts here and here.

Details on the First-Ever White House Maker Faire

The first-ever White House Maker Faire will feature over 100 Makers from more than 25 states, and include more than 30 exhibits. The President will view a subset of these exhibits, representing the incredible range of creativity and ingenuity unlocked by the Maker movement. Following his tour of the White House Maker Faire, the President will deliver remarks to an audience of entrepreneurs, students, business leaders, mayors, and heads of non-profit organizations. A more detailed backgrounder on the notable attendees, exhibitors and other honored Makers at the event is available here.  

ANNOUNCEMENTS BEING MADE TODAY

New steps to support Maker-led startups that will create new industries and jobs.

New technologies for rapid prototyping – from laser cutters to CNC routers to 3D printers – have dramatically lowered the cost of developing a prototype and starting a business in manufacturing. The ability to rapidly and affordably test, tinker, monitor and customize places a premium on locating production close to American markets and opens new doors to entrepreneurship and innovation in manufacturing. The power of these emerging technologies creates the opportunity for Makers to launch new businesses, create jobs and build the industries of the future.

To leverage these opportunities, the Administration announced today that:

  • The Manufacturing Extension Partnership is helping startups scale from DIY to Made in the USA. The NIST Manufacturing Extension Partnership serves more than 30,000 U.S. manufacturers each year with a national network of manufacturing assistance centers across all 50 states. The partnership is helping entrepreneurs that got their start as DIY projects and sellers on Etsy, Tindie, Kickstarter, Dragon Innovation, and Indiegogo, locate U.S. based manufacturers with the right expertise and capabilities to partner with the entrepreneurs in scaling up their businesses through MEP’s American Supplier network. For example, Etsy and Fuze Hub, which was launched with a NIST MEP grant, will conduct a pilot to help small designers and makers scale their production by using and accessing local manufacturers, while also educating them on the development and creation of a manufacturing company. 
  • The Small Business Administration is targeting additional support to startup accelerators that help Maker-entrepreneurs. The Small Business Administration, through its $2.5M Accelerator competition, will encourage communities to include startup accelerators and Maker spaces for entrepreneurs in their regional entrepreneurship strategies. This effort builds on SBA’s commitment to help fund non-traditional startup accelerators, including accelerators that may focus on hardware and manufacturing startups. In addition, SBA and USPTO will work together in raising awareness around the maker and inventor nexus through newly established efforts via the AAAS-Lemelson Invention Ambassador program. This endeavor cultivates a new and diverse generation of inventors and increase global understanding of the role of invention in improving our quality of life, creating new products, building new businesses, and fostering innovation. Finally, to support the growth and development of Makers, the SBA will hold one American Supplier Initiative event aimed at providing education and training on the three core challenges small business suppliers face: access to markets, access to capital and access to capabilities.
  • The U.S. Patent and Trademark Office will provide novel support for Maker startups and small businesses. In addition to opening outreach spaces that will host programming for Makers in the USPTO’s four new regional offices in Detroit, Denver, Silicon Valley, and Dallas, the USPTO is developing a customized advice hotline for Makers. The USPTO will also release a “how to” guide on patenting and IP issues for Maker entrepreneurs and host a series of roadshows across the country to help entrepreneurs navigate the IP system. The USPTO is also working to educate the youngest entrepreneurs through a summer institute on making and intellectual property for middle and high school teachers; new digital badging for boys and girls in collaboration with the 4-H and Girl Scouts; a collaboration with the YMCA to create Maker spaces for students; and the launch of a “USPTO Kids” web site that will showcase young inventors and Making activities.
  • 11 agencies that collectively grant over $2.5 billion annually to small businesses across the country via the Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs are committing to leverage the programs to support Maker innovations. DOD, HHS, DOE, NASA, NSF, USDA, DOC, DOT, DHS, EPA, and ED will work on identifying new and existing topics that are related to Making and its connection to advanced manufacturing, such as next-generation technologies that increase the variety and value of what an individual or small team can design, prototype and manufacture.  A few examples of the research being conducted includes:
    • The Department of Defense (DoD) has opened up 30 Maker-technology topics for proposals, like the Affordable Manufacturing of Refractory Metal Components.
    • The National Science Foundation (NSF) is searching for innovations that permit manufacturing through a layering process, including 3D printing. 
    • NASA is sponsoring topics like Recycling/Reclamation of 3-D Printer Plastic for Re-use.
  • The U.S. Department of Agriculture will launch two new competitions to galvanize colleges and schools around agricultural technologies and Making. The competitions will launch later this year for community college and middle school students to compete to create commercialization plans and prototypes for existing Agriculture Research Service technologies.  The competitions will help promote agricultural technological development and entrepreneurship that can help promote food, agriculture, natural resources, rural development, nutrition, and related issues.

The private sector and others responding to the President’s call to action by announcing:

  • Local Motors will launch 100 new Microfactories over the next ten years to accelerate innovations in manufacturing. Local Motors, founded by U.S. Marine and Iraq veteran Jay Rogers, is a leader in open-source hardware innovation. Local Motors Microfactories feature Lab spaces that are open to innovators who are willing to share their projects. Each Lab is also a nexus where the community can pursue STEM education and empower a global community of producers of things, not just consumers of things. Partnerships with local schools and universities, government labs and industries provide the community of makers with unprecedented access to both making capabilities and a platform that extends beyond ideation and prototyping to low-volume production and marketing. Within five years, the Microfactories will train over 1,000 students annually and will have offered over $1 million in prizes for new designs. In addition, Local Motors is helping established companies innovate. With GE, for example, Local Motors is helping to bring products to market faster through the FirstBuild Microfactory and Platform (firstbuild.com).
  • Indiegogo is launching a mentorship competition for startups with the support of Amazon, Intel, and Autodesk. Indiegogo, the world’s largest crowdfunding platform, is partnering with Autodesk to launch its first-ever Maker Challenge. This is a great opportunity for the Indiegogo community’s makers to share their work with the world and raise project awareness. Five selected campaigns will receive 123D Mentorship from Autodesk, while all qualifying maker-oriented projects will get access to Autodesk Fusion 360, an easy-to-use 3D CAD/CAM tool for those makers bringing new products to market.
  • TechShop is announcing an expansion to St. Louis and Los Angeles, with its latest ribbon cutting just this week at a new facility in Arlington, VA supported by DARPA and GE.  TechShop, a national network of Maker spaces that offer access to the latest Maker tools and training for the price of a gym membership, is partnering with universities, academic institutions, companies, corporations, local government and individuals to bring TechShop St. Louis and TechShop Los Angeles to those cities next year. TechShop is also in discussions with over a dozen other cities who want to bring TechShop's open access model to their communities.
  • Grommet will bolster innovation in Main Street retail by creating an effective bridge between new products by Makers and store shelves. The Grommet, a product launch platform for new innovative products will today debut a wholesale e-commerce site. The Grommet Wholesale platform will provide a critical missing resource to build sustainable Maker businesses, by creating a more convenient, organized, and curated platform from which retailers can source the newest and most imaginative products for their stores.  With the wholesale extension of their business model, the Grommet will leverage the rich content and data-driven consumer validation created by their existing business to de-risk the purchase of otherwise unproven products for small retailers on its wholesale platform. Grommet’s end goal is to assure that within five years, 10% of all products flowing through US retail are originating from independent small-scale Makers, who create vibrant jobs and innovative products in every corner of the country.
  • Intel will adopt six Maker Cities across the US to encourage education as well as small-scale product design, development and manufacturing efforts in those cities. Intel will engage with local city leaders in Santa Clara, CA and the surrounding Silicon Valley region; Folsom, CA; the Portland, OR Metro area; Chandler, AZ; Austin, TX; and the Albuquerque, NM Metro area to spearhead the coordination of local partnerships, events, and demonstration projects. These efforts will highlight the opportunities for economic growth, workforce development and job creation that arise from a vibrant local maker scene.
  • Kickstarter is launching a new funding category specifically for Makerspaces: Today Kickstarter, a funding platform for creative projects is announcing that the creation of a new funding category for Maker Spaces, as part of a broader Civic initiative. The launch of a new category for Makerspaces -- places where people can come together to make new things -- is a rallying cry for builders, hackers and developers everywhere. To date, more than $1.1 billion dollars have been pledged to Kickstarter projects, and over 62,000 projects have been successfully funded by more than 6 million people. Much of that support has gone to projects by Makers over the past five years, but calling attention to the physical spaces where many of these Maker projects began will make it easier than ever for new and existing Makers to find support and funding.
  • Etsy is empowering unemployed adults to become entrepreneurs using their artistic skills by expanding its Craft Entrepreneurship program to ten cities and by making the curriculum publicly available in 2015. Craft Entrepreneurship teaches unemployed and underemployed adults how to monetize their artistic skills online, using Etsy's e-commerce platform as a learning lab. Participants learn skills like pricing, product photography, and search engine optimization and apply them to their online shop. In 2013, Etsy worked with the cities of Rockford, IL and New York City, NY to pilot the Craft Entrepreneurship program in the Rockford public housing authority and the NYC workforce development centers. Bill, an early participant in the Rockford program, is successfully selling his handmade frames on Etsy and at craft fairs, and no longer has to ask his son for help to pay his monthly bills. By incorporating micro-entrepreneurship training and support into workforce development programs, cities can ensure that the opportunities of the maker economy are accessible to all.
  • Trimble Navigation commits to expanding its free software services to Makers by adding cloud based software and 3D printing tools.  Trimble's SketchUp business has been involved in the Maker movement from its inception.  Trimble is committing to expand its free software services to Makers by delivering a professionally managed cloud platform for design through its 3D Warehouse, and through active sponsorship and support of open source development initiatives in the area of 3D Printing and Digital Fabrication (such as Wikihouse and OpenDesk), which connects robotic machine tools with SketchUp’s simple-to-use design environment. Trimble will also continue to offer the SketchUp 3D design software product "SketchUp Make" free to the Maker community and its over 30 million users.  Trimble hosts a website repository of 3D designs and images that is freely accessible to makers looking for inspiration or seeking to share their models and designs.  The SketchUp "3D Warehouse," contains over 2.5 million models, including thousands of Maker designs.
  • Leading tech companies from Google to Microsoft to Esri are helping connect Makers with each other, open up new makerspaces, and make existing makerspaces easier to find:  Esri is developing a live National Day of Making map, with information on the range of universities, libraries, and cities across the country that are taking part in the Day of Making. Additionally, ESRI’s map will include a live snapshot of National Day of Making by pulling tweets from around the globe and continually updating them on a map, which will allow more people to discover Making in their communities as well as existing resources.  Microsoft is announcing a series of Maker Garage Student Open Houses, giving underserved students access to the Maker Garage and the tools, technology and techniques they need to realize their full potential. Google is launching a public interactive nationwide Maker Map to help makers explore local spaces where they can come together to build new projects.  From July 7th to August 15th, Google and MAKE will also host their third annual Maker Camp - a free summer camp for building, tinkering and exploring available virtually on Google+ and in local neighborhoods. Google will be providing 500 maker “affiliate sites” around the country with a starter kit of technology and materials for the projects, so that campers can make projects together as well as online.

New Steps to Help Inspire and Prepare Many More Students Become Makers.

The Maker Movement can fuel the imagination of American students, and equip them with the skills they need to invent the future. Hands-on learning and Making not only promotes values such as creativity, problem-solving, collaboration, and self-expression, but can also serve as a path to get more girls and boys excited about STEM and about careers making things in manufacturing.

To give more students access to the tools, mentors and spaces they need, the Administration announced today that:

  • The Department of Education and its partners are launching a "make over" challenge to create more makerspaces in schools. The Department of Education is launching a "make over" challenge to accelerate the pace at which career and technical education (CTE) classrooms are redesigned to meet the needs of manufacturing in the 21st century. To help lead this transformation, the Department of Education plans to partner with private industry to launch a "Career and Technical Education Make Over Challenge" for community colleges and high schools around the country. States and local educational agencies will compete to receive technical assistance, and professional development, equipment, and or technology to modernize and upgrade CTE facilities.  The challenge is planned for the 2014-2015 school year.
  • The Institute of Museum and Library Services and its partners are announcing new programing and upcoming investments in support of Making:  IMLS, the lead federal agency that supports the vitality of America’s libraries and museums, is committing to providing at least $1 million in strategic awards this year for libraries and museums to create makerspaces and engage in other maker-related programming. In addition, IMLS will create a Maker@ Your Museum and Library toolkit built off of the expertise developed by over 50 pioneering libraries and museums. Examples of museums supporting efforts to expand making in their communities include:
    • Kid Museum in Montgomery County, Maryland is launching a 7,500 square foot makerspace that is expected to introduce over 20,000 students in the Washington D.C. region in the next year to the power of Making within the next year.
    • The New York Hall of Science will inspire a half million annual visitors to design, make and play through programs like Make Academy, Little Makers, SciPlay and the all-new exhibitions Design Lab and Connected Worlds; and in partnership with Maker Media will welcome more than 80,000 visitors and 600 makers to the fifth annual World Maker Faire in September.
  • The National Science Foundation (NSF) is highlighting Making-related research opportunities to advance STEM education and innovation. Making has the potential to support many of NSF’s goals, such as increasing retention and broadening participation in STEM education; empowering citizen scientists and citizen explorers; adding new possibilities for informal STEM learning; and supporting research in design; prototyping and advanced manufacturing. NSF’s activities build on the significant investments it has already made. For example, NSF strategic investments in additive manufacturing enabled many of the innovations underlying 3-D printing, computer-aided design, geometric modeling and embedded systems. Education programs include out-of-school activities and challenges that engage students and teachers in the manufacturing process and catalyze research on the impacts. NSF has a history of supporting educational programs that are integrated with science and engineering research, including NSF’s investments in engineering research centers and in science and technology centers. In the next year, NSF will hold a Makers Summit to convening researchers and practitioners, including representatives from community makerspaces, engineering schools, communities that do research on learning, libraries, museums, and manufacturers. 
  • DARPA is announcing the first round of Maker-related awards under its $12.5M MENTOR2 program. The program will support the development of teaching materials aimed at students who are either headed towards or currently working in the uniformed services, with a focus on understanding, diagnosing, repairing, and adapting high-tech equipment in low-tech environments.  MENTOR 2's project-based curricula – which will incorporate novel tools related to design, prototyping, and product evaluation – will give students a deeper understanding of modern electromechanical systems and an enhanced ability to maintain and adapt these systems to changing needs. The MENTOR2 awards that DARPA is announcing today are going to Georgia Tech and SRI; DARPA expects to make additional awards later this year, and anticipates that MENTOR2 teaching tools will find wider applicability in other secondary and post-secondary environments.  DARPA is also planning to launch a pilot project later this year to engage Makers and entrepreneurs with new ideas for robotics.
  • The Smithsonian is launching a multi-year Making Initiative using its vast collections of historical objects.  Smithsonian will launch a five-year Making Initiative, with the mission of using the Smithsonian’s vast collections and deep expertise, along with facilitators, mentors, and digital resources, to help makers of all ages learn about the past, understand the challenges of today, and imagine the future. Over the next five years, the Initiative will include: continuing to develop hands-on and creative learning spaces in our museums on the National Mall; creating a cohesive digital space for Makers of Smithsonian content; providing a library of curricula, simple how-to guides, and other tools to use Smithsonian’s growing 3D archive; hosting design challenges, with the opportunity to display some of the winning designs be put on display at the Smithsonian; and continuing the digitization of Smithsonian collections into 3D models, into formats suitable for remixing in CAD applications and 3D printing, with the goal to achieve orders of magnitude more scans for makers in the coming years. The Smithsonian is the world’s largest museum and research complex, with 137 million objects, artworks, and specimens, and equally expansive archival holdings.
  • The Department of Education will focus on Making through the 21st Century Community Learning Centers (21st CCLC) program, the Administration’s largest investment in afterschool and summer programming activities:  The U.S. Department of Education (ED) is developing new ways to encourage Making as part of its commitment to expand access to science, technology, engineering and math (STEM) subjects for all students. Making has the exciting potential to catalyze students’ interest in STEM subjects, and encourage learning outside of the classroom. The Department of Education is announcing plans in this fiscal year to make technical assistance and professional development available under the 21st Century Learning Centers (21st CCLC) program so that 21st CCLC sites can offer Making opportunities afterschool and during the summer.  ED is also exploring coordination with the Institute of Museum and Library Services to leverage the Institute’s investment in Maker spaces that are close to 21st CCLC sites, to encourage broader access to Making for students in low-performing schools and low-income neighborhoods.
  • A partnership between the U.S. Department of Agriculture and 4-H clubs nationwide is inspiring more than 27,000 students in rural areas to invent and Make. The U.S. Department of Agriculture Division of Youth and 4-H, in partnership with the National 4-H Council and state 4-H programs, will introduce Making to youth across the country, ensuring that students in rural areas also have access to Making. At 4-H’s first ever Maker Youth Summit in November 2014, 120 4-H mentors will participate in hands-on training in Making. Even more will benefit from new online resources being launched in the coming year, empowering 4-H mentors and leaders to take what they have learned back to their communities and to inspire more students to invent, engineer, and make. By launching mobile Maker spaces, expanding afterschool programs, and holding competitions at state fairs, 4-H clubs in states like California, Virginia, Nebraska, Utah, and West Virginia are gearing up to reach more than 27,000 students and youth.

The private sector and others are responding to the President’s call to action by announcing:

  • More than 150 colleges and universities reaching over 3 million students, from Columbia to Caltech, are taking steps to expand Making on campuses and in their communities. A diverse group of higher education institutions, including universities, community colleges, schools of art and design, and Historically Black Colleges and Universities, signed a letter to the President committing to take concrete steps to empower students to learn through Making, expand access to Maker spaces, incorporate Making into senior design projects and admissions portfolios, and support student entrepreneurship. For example:
    • Case Western Reserve University is announcing plans to break ground on the renovation of a new 50,000 square-foot makerspace, called Think[box], which includes seven floors designed to help students, faculty, and members of the community design, collaborate, prototype, fabricate, incubate, and start companies that can manufacture products and create jobs here in the U.S.
    • Carnegie Mellon University will launch a multi-faceted Maker campaign including a more than $5 million investment in a number of maker spaces on the main campus and at satellite locations as well as eight new interdisciplinary minors focused on learning through Making. Carnegie Mellon will also partner with the Intel Corporation to advance best practices in Maker education for K-16 and lifelong learning, and to develop Maker tool kits and guides that will be available to schools across the country.
    • The Massachusetts Institute of Technology will release a detailed whitepaper about fostering Making on its campus. The document outlines how MIT shapes admissions processes to value and encourage Making, grows Maker-driven curriculum and research, manages maker spaces on campus, and organizes and inspires a student-led culture of making.

    Additional details on the steps being taken by the more than 150 universities and colleges is available here.

  • More than 125 libraries and library systems across the country are committing to support Making. Libraries ranging from small rural public libraries, schools and academic libraries to some of the largest public library systems in the United States are committing to support Making, from creating or adapting current spaces, to investing in tools and technology, to participating in regional efforts that build a tight-knit and vibrant Maker ecosystem. A few examples of such efforts include:
    • Allen County Public Library in Fort Wayne, Indiana has forged a multi-year partnership with TekVenture, a local non-profit maker space to bring maker technologies and activities to library patrons. TekVenture is repurposing a 10,000 sq. ft. building near the Library to provide patrons and the public 24-hour access to a broad range of prototyping and digital fabrication technologies.
    • Chicago Public Library Maker Lab has already served over 44,000 visitors since its opening in July 2013 and will focus on increasing participation and inclusion, particularly of women and minorities.
    • Broward County Library in Fort Lauderdale, Florida runs the Creation Station, which hosts STEM-oriented activities for students. The Library will designate September as Maker Month and will feature a series of DIY events and activities throughout the month.
    • East Baton Rouge Parish Library in Louisiana will be hosting a Mini-Maker Faire in September 2014.

    You can view the full list of 125 libraries and read more about their efforts here.

  • Intel is expanding its nationwide footprint of maker spaces to reach an additional 25,000 young and aspiring makers through its network of Intel Computer Clubhouses, as well as expanding its efforts in higher education. In partnership with the MIT Media Lab, Intel will use its network of 54 Computer Clubhouses across the United States to increase education in Making. Through new curriculum, professional development, and financial support Intel will teach students to bring their ideas to life while inspiring an interest in the foundations of engineering. In total, Intel will expand to reach 25,000 students and youth through its Making!@ Clubhouses initiative. In addition, Intel will donate Intel® Galileo boards to more than 180 US universities in 2014 and will focus those maker tool donation efforts in the adopted Maker Cities. In collaboration with SparkFun Electronics, Intel will offer hands-on professional development workshops to train more than 100 career- K12 and technical-education teachers in its adopted Maker Cities over the next 12 months.
  • 3D Systems, The Coca-Cola Company, and will.i.am are providing more than 1,500 3D printers and kits as part of a drive to ensure that all 3,000 FIRST Robotics Teams have access to 3D printing equipment. The drive aims to equip at least 3,000 FIRST teams in middle schools and high schools across the country with an EKOCYCLE Cube 3D printer using post-consumer recycled plastic for its printer cartridges. 3D Systems and The Coca-Cola Company have committed to donate over half of the 3,000 printer kits to FIRST (valued at over $3 million), with the potential to support over 75,000 FIRST students across the United States. In addition, 3D Systems and Society of Manufacturing Engineers (SME) are installing “starter kits” of the latest 3D scanning, design, and prototyping/ manufacturing tools in SME’s more than 200 affiliated high schools, and building a new nation-wide online network for prospective employers to connect directly with teachers on skills requirements and lesson plans.  This effort will allow CTE directors in every state in the nation to keep their programs on the cutting edge, and transform U.S. industrial arts and vocational education.
  • Disney invests more than $20 million in experiences, resources and tools that foster creativity in young people. As a company that sparks the imaginations of kids and families all over the world through storytelling, Disney plays a powerful role in nurturing the creative-thinking skills of the next generation of innovators and makers. Building on that rich history, Disney is investing more than $20 million this year in experiences, resources and tools that foster creativity and innovation. Continuing its longstanding support of the Maker Movement, Disney will be the title sponsor of the World Maker Faire in New York this September, bringing the best of DIY ingenuity to 75,000 kids and families. Disney supports dreamers and doers through a wide variety of programs across the Company’s businesses and brands, which include Walt Disney Parks and Resorts, Pixar, Marvel, Lucasfilm, ABC and ESPN, among others. Initiatives range from Walt Disney Imagineering’s “Imaginations,” a design competition to seek out and nurture the next generation of Disney Imagineers, to Disney Friends for Change, a global program that inspires kids and families to make a positive difference in their communities through creative solutions and service. 
  • Chevron is announcing a $10 million commitment to the Fab Foundation with plans to support the creation of 10 new community fabrication labs (Fab Labs). The investment will allow more than 20,000 students and adults to access hands-on project based resources over next three to five years. Starting with FabLabs in Richmond, CA and Bakersfield, CA, the effort will grow to additional locations over the next two years in regions with Chevron facilities. Chevron will also work with other leading companies to replicate FabLabs beyond its direct investment. A Fab Lab is a makerspace that consists of a suite of digital fabrication and rapid prototyping machines, including a 3-D desktop mill and scanner, an electronics work bench, a 3-D printer and the accompanying computers and software for design, programming and machine communications.  These applied STEM learning environments enable students to follow their natural curiosity about how things work on a journey through science, technology, engineering and math. Chevron-supported Fab Labs will support K-12 students, but will also be open to workers who seek training or need re-training in new technical and engineering skill sets, to entrepreneurs who aim to prototype business ideas and products, and to community members who want access to high tech tools for prototyping personal projects or for supporting lifelong learning goals.
  • Cognizant is tripling its investment in maker mentorship through its Making the Future program and will reach 200 communities over the next three years. Building on its leadership as provider of information technology, consulting and business process services, Cognizant is announcing that it will triple the size of its Making the Future program to expand and enhance science, technology, engineering and mathematics (STEM) education. Cognizant will provide 1.5 million hours of education programs and serve 25,000 children in 200 communities by 2017. Cognizant’s Making the Future program fosters STEM engagement and learning through after-school and summer programs that are widely accessible, stimulating, enriching and fun. Later this year, Cognizant will release guidelines and supporting materials to mentor organizations on how to effectively participate in and implement Making programs and events. To maximize this opportunity, Cognizant will also work to develop a coalition of like-minded organizations committed to expanding Making opportunities to more youth in communities across the United States.
  • Autodesk to launch a program for young makers to empower the next generation manufacturing workforce.  The Autodesk "Make the Future" program will  offer millions of youth a freely available unique and comprehensive combination of tools and content, including professional-grade, cutting-edge 3D design software; new curricula focused on “Making” and 3D printing nationwide competitions that enable students to showcase their talent; and maker badges to enable students to mark their progress. The "Make the Future" program builds on Autodesk’s “Design the Future” program, which provides over 16 million students from 27,000 middle and high schools nationwide with free access to professional 3D design tools from Autodesk, curricula aligned to national standards, and training and certification for educators.  Autodesk will also explore developing a Maker Certification program with a third-party partner.
  • LEGO Systems announces a Junior Maker Program, starting with Making Toolkits that will be delivered to over 750 libraries nationwide:  LEGO Systems, a worldwide leader in play materials that spark so many children's imaginations, today announced a Junior Maker program to create more opportunities for young children to play, make and share. In partnership with the Association for Library Service to Children (ALSC), beginning in July 2014, any children's librarian will be able to download a free, digital toolkit with information and inspiration to host Junior Maker Sessions via the ALSC resources website. More than 750 libraries nationwide will receive a physical toolkit to host ongoing Junior Maker sessions in children's reading areas. Each toolkit will include over 10,000 LEGO(r) bricks, an activity guide and academic insights from The LEGO Foundation's Cultures of Creativity report. Additionally, the company will co-host Junior Maker sessions, as recently held at the Washington DC, Mini Maker Faire, in 20 libraries. Beginning in July, parents can find free downloadable activities and play tips at LEGO.com/Juniors. Additional insights and inspiration for informal learning through play will be made available to millions of families in an issue of the LEGO Club Jr. magazine.
  • The Maker Education Initiative (Maker Ed) is launching a new campaign to create and expand youth-oriented makerspaces across the country: Building on the goals of the President's Education to Innovate campaign, Maker Ed will support making projects and programs with more than 100,000 children and families in 2014. This includes the expansion of Maker Ed's AmeriCorps VISTA project to five new cities -- Baltimore, Detroit, Pittsburgh, Miami, San Antonio -- reaching 22,000 youth in high poverty communities. Maker Ed is now launching a new campaign to accelerate the creation and expansion of independent, youth-oriented makerspaces to ensure every child in America has access to a nearby makerspace. Maker Ed will foster a Makerspace Network, including key steps to: offer program models for makerspaces, share best practices, provide professional development, create networks for volunteers, develop a directory and map of active spaces, and collaborate with major youth-serving organizations. Partners currently committed to help launch this effort include: Autodesk, Cognizant, Corporation for National and Community Service, FIRST, Intel, MakerMedia, and US2020. To pledge to join this effort, learn more at MakerEd.org.
  • The 100Kin10 network is building on its momentum to support excellent teachers and cultivate a generation of children to be makers: Responding to the President’s call to action to prepare 100,000 excellent STEM teachers over the next ten years, 200 organizations have come together in a coalition called 100Kin10. These organizations have made over 250 measurable commitments, which 100Kin10 estimates will help directly recruit and prepare over 40,000 STEM teachers and support tens of thousands more over the first five years of the initiative. The network has now raised over $59 million from a broad range of foundations and philanthropists under a unique “funding marketplace” model through which funders can choose from a registry of high-quality proposals. As a next step, 100Kin10 is announcing two new funding pledges. The Tortora Sillcox Family Foundation has pledged $1 million to fund initiatives that increase the number of low-income New York City public school students engaged in rigorous STEM courses through the recruitment and support of effective STEM teachers. Freeport-McMoRan Copper & Gold Foundation has made a renewed pledge of $1.5 million to fund programs to recruit, prepare, retain, develop, and motivate excellent STEM teachers in Arizona, Colorado, and New Mexico. These investments will support excellent educators who share their passion for science, math, engineering, and technology and who can create deeply immersive project-based Making experiences that will inspire students to create, Make and share.
  • MacArthur and partners are expanding Cities of Learning, and supporting Making badges. The John D. and Catherine T. MacArthur Foundation, along the Digital Youth Network and Badge Alliance, is announcing the expansion of the Cities of Learning effort to encourage interest-driven learning in Maker spaces and other community places, as well as online. Through Cities of Learning, youth can earn digital open badges to document their Making skills and other out-of-the-classroom learning. The badges are stored online and can be easily shared with schools, colleges, and employers to showcase achievements. The Cities of Learning movement which started in Chicago last year is growing fast, with three new Cities kicking off this month, two others launching this fall, and more lining up for 2015. This year's programs in Chicago, Columbus, Dallas, Los Angeles, Pittsburgh and Washington, D.C., will include opportunities for hundreds of thousands of students to earn Making badges, along with other badges for competencies in Science, Technology, Engineering, Math and the Arts. With national support from MacArthur, each city is a grassroots effort, often spearheaded by the Mayor’s Office and supported by local public-private partnerships. For example, the Chicago City of Learning effort includes 3D jewelry printing, e-textile fashion design, and Mayor Rahm Emanuel’s visit to a teen Maker showcase. Digital technology is transforming how today’s youth learn and what skills they need to thrive in the new economy and Cities of Learning are embracing the challenge, by ensuring youth from all backgrounds and circumstances have opportunities to tinker, collaborate, Make and create, becoming the digital pioneers, creative thinkers, and innovators of tomorrow.
  • Mozilla is announcing new partners for its Maker Party campaign to celebrate making and learning. Last year, Mozilla, in partnership with the MacArthur Foundation and National Writing Project, helped catalyze over 1,700 “pop-up” making events across 330 cities where thousands of people of all ages created or remixed websites, made stop-motion animation films, built robots, designed games and more. Today, Mozilla is announcing plans for the 2014 campaign, which will kick off on July 15. Mozilla is teaming up with a variety of partners, including the Institute of Museum and Library Services, which will promote at all the public libraries and museums within their network; the National 4-H Council, which will promote to its 500,000 4-H program leaders, volunteers, parents and youth across the country, and the Association of Science and Technology Centers, which will promotes the effort to more than 390 affiliated science and tech centers. In addition, the C.S. Mott Foundation will partner with Mozilla to support Maker Parties in more than 10 states through the National Network of Statewide Afterschool Networks.
  • Brit + Co is kicking off a new effort to reach Makers of all ages: Brit + Co., an online media and e-commerce platform that provides tools to teach, inspire, and enable creativity, is launching an effort to help more women and girls pursue their passions and become Makers. This will include campus maker events with potential to reach 20,000 makers per year, a large-scale yearly ‘Makeathon’ conference to get more women engaged in industrial design, sponsoring a number of sponsored “makers in residence” at Brit + Co’s headquarters, and a series of free e-classes designed to give teachers the physical and virtual tools to engage K-12 students in hands-on maker curriculum.
  • Teach for America and partners launching a new Maker Teacher campaign: Teach for America and its partners STEMConnector, Project Lead the Way and the Digital Harbor Foundation are launching a new campaign to recruit and connect its community of educators to Making. Organized under a new online pledge form available at MakerTeacher.org, the effort will focus on exposing more teachers to the Maker Movement, connecting those already interested to available resources and creating opportunities for educators to collaborate.
  • Master teachers are developing Making curriculum to support the new science standards with hands-on, project-based learning. The Albert Einstein Teaching Fellows, incubated in the National Science Foundation and Department of Energy, are partnering with 3D Systems to design new curriculum and tools for teachers to bring 3-D printing into K-9 education. Access to 3D printing can turn a classrooms into a mini-Maker laboratory while aligning with latest from the Next Generation Science Standards. BetterLesson is developing blended learning curriculum around the new Next Generation Science Standards and identifying the first-ever Maker Master Teachers. Master Maker Teachers highlight teachers who truly bring to life the Maker Movement in their classrooms, and capture their best practices for effectively teaching a hands-on approach to STEM education. BetterLesson’s Blended Master Teacher Project, created in partnership with the Learning Accelerator, will detail the effective techniques of teachers working in a blended environment. In addition, littleBits will be supporting schools and educators with over $20,000 in littleBits products, with the goal to help educators integrate hands-on STEAM learning in their classrooms, makerspaces and after school programs.
  • The Digital Harbor Foundation is launching a new Center of Excellence to support Making in schools. The Center of Excellence for Innovation in Technology Education is a technical assistance and training effort to support the ability of schools and non-profits to integrate Making into their programs. To start, the Center is supporting Baltimore-based Green Street Academy and Barclay Elementary and Middle School, both of whom will be launching maker programs in topics that include 3D printing, electronics, web design, and engineering.

New steps to harness the creativity and skills of Makers to tackle pressing challenges. Our most pressing challenges require the passion, ingenuity and skills of Americans young and old. These citizen solvers can approach problems with fresh eyes, create new networks of partners and use these tools to design new solutions. This confluence of engaged citizens and tools is why a number of Federal agencies and private-sector partners believe that Makers can be a powerful complement in their strategies to tackle big problems.

Key steps being announced today include:

  • USAID, the World Bank, Lemelson Foundation, Intel, and others will support Makers around the world to improve livelihoods and wellbeing.  USAID, the World Bank, and Intel have teamed up with the Fab Foundation to launch a Global Fab Award, which will encourage the invention of open-source, maker-ready sensor technologies to improve the livelihoods of the world’s most vulnerable people by providing better access to information on critical issues such as healthcare diagnostics, agricultural production, and the availability of clean drinking water.  At the international Fab10 Conference, the partnership will crowdsource a catalog of Maker solutions that can drive economic development and address social challenges in countries around the world. A roundtable was also held on incorporating the Maker Movement more broadly into the President’s Young African Leaders Initiative (YALI).  As part of its commitment to Making in Africa, Intel Corporation and YALI are partnering on the 5th Maker Faire Africa in Johannesburg, South Africa from September 3-6, 2014. Finally, the U.S. Global Development Lab at USAID, along with the Lemelson Foundation, will be supporting the development of Gearbox, an East African design and prototyping space that empowers local innovators and catalyzes scalable businesses to invent solutions for development needs.
  • NASA and its partners are inspiring the new generation of space enthusiasts and Makers to help expand our capabilities in space:  A growing community of space-enthusiasts has the ability to contribute to NASA’s space exploration goals through their passion, technical expertise, and ability to use new additive technologies. To leverage this opportunity, NASA is announcing:

    • New "Future Engineers" printing challenges for the first 3D printer aboard the International Space Station, in conjunction with the American Society of Mechanical Engineers Foundation. Middle and high school students will design items for 3D printing on ISS, and the winning student will watch from NASA’s Payload Operations Center with the mission control team as the item is printed in space.  NASA and the ASME Foundation will also promote these projects and others in Maker Community Challenge Showcases, in which student participants would have the opportunity to have their 3D designs printed at local Maker community locations and student participants would showcase their 3D designs in on online open hardware design repository.

    • A new announcement of opportunity for CubeSat developers later this year, with the goal of broadening its reach to all 50 states by targeting the 21 "rookie states" that have had no previous CubeSat presence in space, and will leverage the existing NASA Space Grant network of colleges and universities. CubeSats provide the opportunity for Makers to build small satellites to demonstrate new innovative technologies and conduct scientific research in a space environment. To date, NASA has selected CubeSats from 29 states, 17 of which have already been launched, and two more are slated to go to space later this year.

    •  An additive manufacturing competition with America Makes that will challenge participants to find new ways to create safe shelters using locally available materials and constructed at the point of use. 

  • Agencies are deploying rapid prototyping to the frontlines to pursue critical missions. Agencies are increasingly empowering federal workers across the country and deployed overseas to innovate on the frontlines to improve government services and to deliver on critical missions and objectives. For example, the Department of Defense is beginning to use these innovative approaches to equip and empower more “military MacGyvers” to solve problems with the resources at hand.  The Army’s Expeditionary Labs allowed soldiers to improve the armored fighting vehicles that protect them against land mines.  The Navy’s “Project Athena” enables sailors with great ideas on the USS Benfold to lead a small team and make it happen.  The Department of Defense will develop a strategy to scale up these and other initiatives to harness the creativity and ingenuity of the men and women of the Armed Forces.
  • The Department of Homeland Security Science and Technology Directorate is creating a Government Maker Corps program to recruit more than 100 tinkerers, innovators, and doers to apply their talents to public service. Today, the Department of Homeland Security Science and Technology Directorate is launching a Government Maker Corps program to recruit creative and energetic Makers to contribute to projects with rapid prototyping opportunities.  The interagency Ideation Community of Practice (ICOP), a network of over 200 federal innovators from 25 agencies, will partner with stakeholders to develop a Government Maker Initiative Playbook – a “how-to” guide for policymakers and agencies to leverage innovations from the Maker community.
  • NIH is launching the NIH 3D Print Exchange (3Dprint.nih.gov), the first-ever government-sponsored database of 3D-printable bioscientific and biomedical files. The NIH is making high-quality, scientifically accurate 3D printable files for bioscientific and biomedical applications available through an online, open access portal. For example, the portal will host 3D printable files of custom and innovative lab equipment, anatomical features and the molecular structures of proteins, all derived directly from real scientific data. The NIH 3D Print Exchange allows users to discover, share, and create bioscientific and biomedical 3D models that are ready to download and print in 3D. Physicians and patients can use the Exchange to visualize disease processes and treatments through 3D prints of medical imaging data. Students, teachers, and parents will find accompanying worksheets and lesson plans for use in STEM education. In the coming months, the Exchange will announce a nationwide challenge, calling on students to create their own 3D bioscientific models, to encourage use of 3D prints and 3D modeling techniques in the classroom.
  • New communities and tools will empower nurses to make and innovate to improve patient care. MakerNurse, an initiative of the Little Devices Lab at MIT, with support from the Robert Wood Johnson Foundation, is announcing the launch of a new online community for Maker Nurses. The new platform will provide tools and resources to empower nurses to make and innovate at the bedside, improving patient care and health. The mission is to bring health and wellness technologies out of the black box so that every patient, every nurse and every caregiver can be a health maker. In addition, MIT’s International Design Centre and the Institute for Medical Engineering and Science are announcing the first ever DIY Medical Technologies Conference in the fall of 2014 to galvanize the design, fabrication, science and policies around democratized medical technologies. The event will include medical makers who are patients, caregivers, healthcare professionals and DIY medical technology practitioners, all sharing and exploring what this new field can bring to our healthcare system.
  • Global Minimum commits to supporting more than 300 Youth Makers in Africa. Non-profit organization Global Minimum’s InChallenges program identifies young inventors and entrepreneurs, and supports them in transforming their ideas into first-stage prototypes, and subsequently into scalable social innovations. The InChallenges program runs in Sierra Leone, Kenya and South Africa, where students are given the tools, resources, and network to develop real solutions to local problems affecting their communities. The InChallenges program will be hosted in all three countries in 2014, encouraging youth throughout the continent to use making to solve local challenges they understand deeply.